Hawking HWRN1A Router Manual PDF (Setup & Configuration Guide)

Page 111 / 138 Scroll up to view Page 106 - 110

102

wireless device indicates ‘aa-bb-cc-dd-ee-ff’ or

‘aa:bb:cc:dd:ee:ff’, just input ‘aabbccddeeff’

Computer Name (3): Pull down the menu and all the computers

connected to the router will be listed here. You can

easily to select the computer name without checking

the IP address of the computer.

Comment (4):

You can input any text here as the comment of this

MAC address, like ‘ROOM 2A Computer’ or

anything. You can input up to 16 alphanumerical

characters here. This is optional and you can leave

it blank, however, it’s recommended to use this field

to write a comment for every MAC addresses as a

memory aid.

Add (5):

Click ‘Add’ button to add the MAC address and

associated comment to the MAC address filtering

table.

Reset (6):

Remove all inputted values.

MAC Filtering

All existing MAC addresses in filtering table

Table (7):

will be listed here.

Delete Selected (8):

If you want to delete a specific MAC address entry,

check the ‘select’ box of the MAC address you want

to delete, then click ‘Delete Selected’ button. (You

can select more than one MAC addresses).

Delete All (9):

If you want to delete all MAC addresses listed here,

please click ‘Delete All’ button.

Reset (10):

You can also click ‘Reset’ button to unselect all

MAC addresses.

Enable IP

Check this box to enable IP address based

Filtering Table (11): filtering, and please select ‘Deny’ or ‘Allow’

Page 112 / 138

103

to decide the behavior of IP filtering table. If you

select deny, all IP addresses listed in filtering table

will be denied from connecting to the network; if

you select allow, only IP addresses listed in filtering

table will be able to connect to the network, and

rejecting all other network devices.

IP Filtering

All existing IP addresses in filtering table will be

Table (12):

listed here.

Add PC (13):

Click this button to add a new IP address to IP

filtering table, up to 20 IP addresses can be added.

Please refer to section 3-3-1-1 ‘Add PC’ below.

Delete

If you want to delete a specific IP address entry,

Selected (14):

check the ‘select’ box of the IP address you want to

delete, then click ‘Delete Selected’ button. (You can

select more than one IP addresses).

Delete All (15):

If you want to delete all IP addresses listed here,

please click ‘Delete All’ button.

After you finish with all settings, please click ‘Apply’ (16) button and the

following message will be displayed on your web browser:

Please click ‘Continue’ to go back to previous setup menu; to continue on

other setup procedures, or click ‘Apply’ to reboot the router so the

settings will take effect (Please wait for about 30 seconds while router is

rebooting).

If you want to reset all settings in this page back to previously-saved

value, please click ‘Cancel’ button.

Page 113 / 138

104

3-3-1-1 Add PC

After button is clicked, the following message will be displayed on your

web browser:

a

b

c

d

e

f

Page 114 / 138

105

Here are descriptions of every setup items:

Client PC

Please input any text to describe this IP

Description (a):

address, up to 16 alphanumerical characters.

Client PC IP

Please input the starting IP address in the left

address (b):

field, and input the end IP address in the right field

to define a range of IP addresses, or just input the

IP address in the left field to define a single IP

address.

Client PC

Please check all services you want to allow or

Service (c):

deny this IP address to use, you can check multiple

services.

Protocol (d):

If the service you need is not listed above, you can

create a new service on your own. Please select

TCP or UDP, if you’re not sure, please select

‘Both’.

Port Range (e):

Please input the port range of new service here. If

you want to specify port 80 to 90, please

input ’80-90’; if you want to apply this rule on a

single port, just input the port number, like ‘80’.

Add (f):

When you finish with all settings, please click ‘Add’

to save settings, you’ll be brought back to previous

menu, and the rule you just set will appear in

current IP filtering table.

If you want to remove all settings in this page, click ‘Reset’ button.

Page 115 / 138

106

3-3-2 URL Blocking

If you want to prevent computers in a local network from accessing

certain website (like pornography, violence, or anything you want to

block), you can use this function to stop computers in a local network

from accessing the site you define here.

This function is useful for parents and company managers.

Please follow the following instructions to set URL blocking parameters:

Please click ‘Security’ tab at top of web management interface, then click

‘URL Blocking’, and the following message will be displayed on your

web browser:

Here are descriptions of every setup items:

Enable URL

Check this box to enforce URL Blocking,

Blocking (1):

uncheck it to disable URL Blocking.

URL/Keyword (2):

Input the URL (host name or IP address of website,

like

http://www.blocked-site.com

or

http://11.22.33.44

), or the keyword which is

contained in URL (like pornography, cartoon, stock,

or anything).

1

2

3

4

5

6

7

8

9

Rate

Popular Hawking Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share