Page 41 / 134
Scroll up to view Page 36 - 40
33
2-5-2 Setup procedure for ‘Wired Internet Connections:
To setup a wired Internet connection such as Cable Modem or DSL, please
click configure next to ‘Wired Internet Connection’
A menu will appear with a choice of wired Internet connection types.
Select
the one that fits your connection and scroll to the menu describing your
selection below.
Page 42 / 134
34
Dynamic IP
- Please go to section 2-5-3
Fixed IP
- Please go to section 2-5-4
PPPoE
- Please go to section 2-5-5
PPTP
- Please go to section 2-5-6
DNS
- Please go to section 2-5-7
DDNS
- Please go to section 2-5-8
1
Page 43 / 134
35
2-5-3 Setup procedure for ‘Dynamic IP’:
Here are descriptions of every setup items:
Host Name (1):
Please input host name of your computer, this is
optional, and only required if your service provider asks
you to do so.
MAC Address (2):
Please input MAC address of your computer, if your
service provider only permits computer with certain
MAC address to access internet. If you’re using the
computer which used to connect to Internet via cable
modem, you can simply press ‘Clone Mac address’
button to fill the MAC address field with the MAC
address of your computer,
After you finish with all settings, please click ‘OK’ (3); if you want to remove a
value you entered, please click ‘Back’.
After you click ‘OK’, the following message will be displayed on your web
browser:
1
2
3
Page 44 / 134
36
Press ‘Go Back to save the settings made and go back to the web
management interface; press ‘Apply’ to save the settings made and restart the
Smart Repeater so the settings will take effect after it reboots.
2-5-4 Setup procedure for ‘Static IP’:
Here are descriptions of every setup items:
IP address assigned
Please input IP address assigned
by your Service
by your service provider.
Provider (1):
Subnet Mask (2):
Please input subnet mask assigned by your service
1
2
3
4
5
Page 45 / 134
37
provider
DNS address (3):
Please input the IP address of DNS server
provided by your service provider.
Service Provider
Please input the IP address of DNS
Gateway Address (4):
server provided by your service provider.
After you finish with all settings, please click ‘Apply’ (5) button and the following
message will be displayed on your web browser:
Press ‘Go Back to save the settings made and go back to the web
management interface; press ‘Apply’ to save the settings made and restart the
Smart Repeater so the settings will take effect after it reboots.
If you want to reset all settings in this page back to previously-saved value,
please click ‘Cancel’ button.
19216811.live