Hawking HW2R1 Router Manual PDF (Setup & Configuration Guide)

Home

Manuals

Hawking

HW2R1

Page 46 / 134 Scroll up to view Page 41 - 45

2-5-5 Setup procedure for ‘PPPoE’:

User Name (1):

Please input user name assigned by your Internet

service provider here.

Password (2):

Please input the password assigned by your Internet

service provider here.

Service Name (3):

Please give a name to this Internet service, this is

optional

MTU (4):

Please input the MTU value of your network connection

here. If you don’t know, you can use default value.

Connection

Please select the connection type of Internet

Type (5):

connection you wish to use.

Continuous – The connection will be kept always on. If the

connection is interrupted, the Smart Repeater will

re-connect automatically.

Page 47 / 134

Connect On-Demand – Only connect when you want to

surf the Internet. “Idle Time Out” is set to stop the

connection when the network traffic is not sending or

receiving after an idle time.

Manual – After you have selected this option, you will see

the “Connect” button and “Disconnect” button, click

“’Connect” and the Smart Repeater will connect to the ISP.

If you want to stop the connection, please click

“Disconnect” button.

Idle Time Out (6):

If you have selected the connection type to

“Connect-On-Demand”, please input the idle time out.

After you finish with all settings, please click ‘Apply’ (7) button and the following

message will be displayed on your web browser:

Press ‘Go Back to save the settings made and go back to the web

management interface; press ‘Apply’ to save the settings made and restart the

Smart Repeater so the settings will take effect after it reboots.

If you want to reset all settings in this page back to previously-saved value,

please click ‘Cancel’ button.

2-5-6 Setup procedure for ‘PPTP’:

PPTP requires two kinds of setting: WAN interface setting (setup IP address)

and PPTP setting (PPTP user name and password). Here we start from WAN

interface setting:

Page 48 / 134

Select the type of how you obtain IP address from your service provider here.

You can choose ‘Obtain an IP address automatically’ (equal to DHCP, please

refer to ‘Cable Modem’ section above), or ‘Use the following IP address’ (i.e.

static IP address)

WAN interface settings must be correctly set, or the Internet connection will fail

even if settings of PPTP settings are correct. Please contact your Internet

service provider if you don’t know what you should fill in these fields.

Page 49 / 134

PPTP settings section:

Here are descriptions of every setup items:

User ID (1):

Please input user ID (user name) assigned by your

Internet service provider here.

Password (2):

Please input the password assigned by your Internet

service provider here.

PPTP Gateway (3):

Please input the IP address of PPTP gateway assigned

by your Internet service provider here.

Connection ID (4):

Please input the connection ID here, this is optional and

you can leave it blank.

MTU (5):

Please input the MTU value of your network connection

here. If you don’t know, you can use default value.

BEZEQ-ISRAEL (6):

If you are connecting to the BEZEQ network in Israel.

Please enable this function.

Connection

Please select the connection type of Internet

type (7):

connection you wish to use, please refer to section

2-5-3 for detailed descriptions.

Page 50 / 134

Idle Time Out (8):

Please input the idle time out of Internet connection you

wish to use, and refer to section 2-5-3 for detailed

descriptions.

Setting item ‘BEZEQ-ISRAEL’ is only required to check if you’re using the

service provided by BEZEQ network in Israel.

When you finish with all settings, please click ‘OK (9); if you want to go back to

previous menu, click ‘Back’.

2-5-7 Setup procedure for ‘L2TP’:

Here are descriptions of every setup items:

User ID (1):

Please input user ID (user name) assigned by your Internet

service provider here.

Password (2):

Please input the password assigned by your Internet service

provider here.

L2TP

Please input the IP address of PPTP gateway

Gateway (3):

assigned by your Internet service provider here.

MTU (4):

Please input the MTU value of your network connection here.

If you don’t know, you can use default value.

Rate

Popular Hawking Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share