Page 31 / 134
Scroll up to view Page 26 - 30
23
Allow the HW2R1 to reboot.
This should take no more than 30
seconds.
After the system reboots, you can test your Internet connection to check
that your setup was successful.
Once your Internet connection has tested successfully your setup is
officially complete.
If you do not have an Internet connection you will
need to check the settings of your Wireless Internet connection that you
are trying to connect to.
Page 32 / 134
24
2-4 Basic Setup
In this chapter, you’ll learn how to change the time zone, password, and
remote management settings. Please start your web browser and log onto
Smart Repeater web management interface, then click on the ‘General Setup’
tab.
2-4-1 Time zone and time auto-synchronization
Please follow the following instructions to set time zone and time
auto-synchronization parameters:
Please click ‘System’ tab in menu on the left of web management interface,
then click on Time Zone.
Please select the correct time zone from the
drop-down list, and input the IP address or host name of time server. If you
want to enable daylight savings time settings, please check ‘Enable Function’
box, and set the duration of daylight setting. When you finish, click ‘Apply’.
You’ll see the following message displayed on web browser:
Page 33 / 134
25
Press ‘Go Back to save the settings made and go back to the web
management interface; press ‘Apply’ to save the settings made and restart the
Smart Repeater so the settings will take effect after it reboots.
2-4-2 Change management password
The default password of this Smart Repeater is 1234, and it’s displayed on the
login prompt when accessed from web browser. There’s a security risk if you
don’t change the default password, since everyone can see it. This is very
important when you have wireless function enabled.
To change password, please follow the instructions:
Please click ‘Admin’ tab at top of web management interface, then click
‘Password Settings’, and the following message will be displayed on your web
browser:
NOTE: You can refer to the instructions given in the last chapter:
‘Using Quick Setup’, for detailed descriptions on time zone settings.
Page 34 / 134
26
Here are descriptions of every setup item:
Current
Please input current password here.
Password (1):
New Password (2):
Please input new password here.
Confirmed
Please input new password here again.
Password (3):
When you finish, click ‘Apply’. If you want to keep original password
unchanged, click ‘Cancel’.
If the password you typed in ‘New Password’ (2) and ‘Confirmed Password’ (3)
field are not the same, you’ll see the following message:
Page 35 / 134
27
Please retype the new password again when you see above message.
If you see the following message:
This error displays when the ‘Current Password’ field is entered incorrectly.
Please click ‘OK’ to go back to previous menu, and input your current
password again.
After entering the correct login information you will be prompted to login again
with your new login settings.
19216811.live