Page 61 / 151 Scroll up to view Page 56 - 60
60
2-5-5 Setup Procedure for ‘L2TP’:
L2TP is another popular connection method for DSL.
Select how you will obtain an IP address from your service provider. You
can choose ‘Obtain an IP address automatically’ (equal to DHCP, please
refer to ‘Dynamic IP’ section above), or ‘Use the following IP address’ (i.e.
static IP address).
WAN interface settings must be correctly set, or the Internet connection will
fail. Please contact your Internet service provider if you do not know what
you should fill in these fields.
Page 62 / 151
61
User ID (1):
Please input user ID (user name) assigned by your Internet
service provider here.
Password (2):
Please input the password assigned by your Internet
service provider here.
L2TP
Please input the IP address of L2TP gateway
Gateway (3):
assigned by your Internet service provider here.
MTU (4):
Please input the MTU value of your network connection
here. If you don’t know, you can use default value.
Connection
Please select the connection type of Internet connection
type (5):
you wish to use, please refer to section 2-5-3 for detailed
descriptions.
Idle Time
Please input the idle time out of Internet connection
Out (6):
you wish to use
If you want to reset all settings in this page back to previously-saved value,
please click ‘Cancel’ button.
When you finish with all settings, please click ‘Apply’ (7) button and the
following message will be displayed on your web browser:
1
2
3
4
5
6
7
Page 63 / 151
62
Press ‘Go Back’ to save the settings made and go back to web management
interface; press ‘Apply’ to save the settings made and restart the router so the
settings will take effect after it reboots.
Page 64 / 151
63
2-5-7 Setup Procedure for ‘DNS’:
If you select ‘
Dynamic IP
’ or ‘
PPPoE
’ as Internet connection method, at
least one DNS server’s IP address should be assigned automatically.
However, if you have preferred DNS server, or your service provider didn’t
assign the IP address of DNS server for any reason, you can input the IP
address of the DNS server here.
DNS Address (1):
Please input the IP address of DNS server provided by
your service provider.
Secondary
Please input the IP address of another DNS
DNS Address (2):
server provided by your service provider, this is
optional.
NOTE: Only IP address can be entered here;
DO NOT
use the hostname
of DNS server! (i.e. only numeric characters and dots are accepted)
10.20.30.40……………………………………………………………… Correct
dns.serviceprovider.com…………………………………………... Incorrect
1
2
3
Page 65 / 151
64
If you want to reset all settings in this page back to previously-saved value,
please click ‘Cancel’ button.
After you finish with all settings, please click ‘Apply’ (3) button and the
following message will be displayed on your web browser:
Press ‘Go Back’ to save the settings made and go back to web management
interface; press ‘Apply’ to save the settings made and restart the router so the
settings will take effect after it reboots.

Rate

4.5 / 5 based on 2 votes.

Popular Hawking Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top