48
2-4-3 Remote Management
This router by default does not allow management access from Internet, to
prevent possible security risks.
However, you can enable this function by
enabling the ‘Remote Management’ Function.
To do so, please follow the following instructions:
Please click ‘System’ menu on the left of web management interface, then
click ‘Remote Management’, and the following message will be displayed
on your web browser:
Host Address (1):
Input the IP address of the remote host you wish to
initiate a management access.
Port (2):
You can define the port number this router should
expect an incoming request. If you’re providing a web
service (default port number is 80), you should try to
use other port number. You can use the default port
setting ‘8080’, or something like ‘32245’ or ‘1429’.
(Any integer between 1 and 65534)
Enable (3):
Check the field to start the configuration.
When you finish with all settings, click ‘Apply’, and you’ll see the following
1
2
3
4
19216811.live