Page 56 / 151
Scroll up to view Page 51 - 55
55
2-5-3 Setup Procedure for ‘PPPoE’:
User Name (1):
Please input user name assigned by your Internet
service provider here.
Password (2):
Please input the password assigned by your Internet
service provider here.
Service Name (3):
Please give a name to this Internet service, this is
optional
MTU (4):
Please input the MTU value of your network
connection here. If you don’t know, you can use default
value.
Connection
Please select the connection type of Internet
Type (5):
connection you wish to use.
Continuous – The connection will be kept always on. If
the connection is interrupted, the router will re-connect
1
3
2
4
5
6
7
Page 57 / 151
56
automatically.
Connect On-Demand – Only connect when you want to
surf the Internet. “Idle Time Out” is set to stop the
connection when the network traffic is not sending or
receiving after an idle time.
Manual – After you have selected this option, you will
see the “Connect” button and “Disconnect” button,
click “’Connect” and the router will connect to the ISP.
If you want to stop the connection, please click
“Disconnect” button.
Idle Time Out (6):
If you have selected the connection type to
“Connect-On-Demand”, please input the idle time out.
If you want to reset all settings in this page back to previously-saved value,
please click ‘Cancel’ button.
After you finish with all settings, please click ‘Apply’ (7) button and the
following message will be displayed on your web browser:
Press ‘Go Back’ to save the settings made and go back to web management
interface; press ‘Apply’ to save the settings made and restart the router so the
settings will take effect after it reboots.
Page 58 / 151
57
2-5-4 Setup Procedure for ‘PPTP’:
PPTP requires two kinds of setting: WAN interface setting (setup IP address)
and PPTP setting (PPTP user name and password). Here we start from WAN
interface setting:
You can choose ‘Obtain an IP address automatically’ (equal to DHCP, please
refer to ‘Dynamic IP’ section above), or ‘Use the following IP address’ (i.e.
static IP address)
WAN interface settings must be correctly set or the Internet connection will
fail even those settings of PPTP settings are correct. Please contact your
Internet service provider if you do not know what you should fill in these
fields.
Page 59 / 151
58
User Name (1):
Please input user ID (user name) assigned by your
Internet service provider here.
Password (2):
Please input the password assigned by your Internet
service provider here.
PPTP Gateway (3):
Please input the IP address of PPTP gateway assigned
by your Internet service provider here.
Connection ID (4):
Please input the connection ID here, this is optional
and you can leave it blank.
MTU (5):
Please input the MTU value of your network
connection here. If you don’t know, you can use default
value.
BEZEQ-ISRAEL (6): If you are connecting to the BEZEQ network in Israel.
Please enable this function.
Connection
Please select the connection type of Internet
type (7):
connection you wish to use, please refer to section
2-5-3 for detailed descriptions.
8
9
1
2
3
4
5
6
7
Page 60 / 151
59
Idle Time Out (8):
Please input the idle time out of Internet connection
you wish to use.
If you want to reset all settings in this page back to previously-saved value,
please click ‘Cancel’ button.
When you finish with all settings, please click ‘Apply’ (9) button and the
following message will be displayed on your web browser:
Press ‘Go Back’ to save the settings made and go back to web management
interface; press ‘Apply’ to save the settings made and restart the router so the
settings will take effect after it reboots.
19216811.live