Page 71 / 151 Scroll up to view Page 66 - 70
70
2-6-3 Static DHCP Leases Table:
This function allows you to assign a static IP address to a specific
computer forever, so you don’t have to set the IP address for a computer,
and still enjoy the benefit of using DHCP server. Maximum 16 static IP
addresses can be assigned here.
(If you set ‘Lease Time’ to ‘forever’ in ‘DHCP Server’ section, you can
also assign an IP address to a specific computer permanently, however,
you will not be able to assign a certain IP address to a specific computer,
since IP addresses will be assigned in random order by this way).
Enable Static
Check this box to enable this function,
DHCP Leases (1):
otherwise uncheck it to disable this function.
MAC Address (2):
Input the MAC address of the computer or network
device (total 12 characters, with character from 0 to
9, and from a to f, like ‘001122aabbcc’)
IP address (3):
Input the IP address you want to assign to this
computer or network device
‘Add’ (4):
After you inputted MAC address and IP address pair,
click this button to add the pair to static DHCP
leases table.
If you want to remove all characters you just entered, click ‘Clear’.
1
2
3
4
Page 72 / 151
71
After you clicked ‘Add’, the MAC address and IP address mapping will
be added to ‘Static DHCP Leases Table’ section.
If you want to delete a specific item, please check the ‘Select’ box of a
MAC address and IP address mapping (1), then click ‘Delete Selected’
button (2); if you want to delete all mappings, click ‘Delete All’ (3). If you
want to deselect all mappings, click ‘Reset (4).
After you finish all LAN settings, please click ‘Apply’ button on the bottom
of this page. After you click ‘Apply’, the following message will be
displayed on your web browser:
Press ‘Go Back’ to save the settings made and go back to web management
interface; press ‘Apply’ to save the settings made and restart the router so the
settings will take effect after it reboots.
1
2
3
4
Page 73 / 151
72
2-7 Wireless LAN Configurations
If your computer, PDA, game console, or other network devices which is
equipped with wireless network interface, you can use the wireless
function of this router to let them connect to Internet and share resources
with other computers with wired-LAN connection. You can also use the
built-in security functions to protect your network from being intruded by
malicious intruders.
This router supports both 2.4GHz and 5GHz wireless bands simultaneously;
the wireless settings for both wireless bands are almost the same. The
following sections will only highlight the different descriptions between
these two selections.
Enter into ‘General Setup’ page, select ‘2.4GHz Wireless’ or ‘5GHz
Wireless’ to configure the wireless settings for the different wireless bands.
Please follow the following instructions to set wireless parameters:
Page 74 / 151
73
Please click ‘2.4 GHz Wireless’ or ‘5 GHz Wireless’ menu on the left of web
management interface, and the following message will be displayed on your
web browser. You must enable wireless function of this router, or the
wireless interface of this router will not function. Please select ‘Enable’ (1),
then click ‘Apply’ (3) button.
If you’re coming here because you want to disable wireless function,
please select ‘Disable’ (2), then click ‘Apply’ (3) button.
After you click ‘Apply’(3), the following message will be displayed on your
web browser:
Press ‘Go Back’ to save the settings made and go back to web management
interface; press ‘Apply’ to save the settings made and restart the router so the
settings will take effect after it reboots.
1
2
3
Page 75 / 151
74
2-7-1 Basic Wireless Settings
Please click ‘2.4 GHz Wireless’ or ‘5 GHz Wireless’ on the left column of
the web management interface, then click ‘Basic Settings’
2.4GHz Wireless Settings
5GHz Wireless Settings
Band (2):
2.4GHz Band
2.4 GHz (B): this mode only allows 802.11b wireless
network client to connect this router (maximum
transfer rate 11Mbps).
2.4 GHz (N): this mode only allows 802.11n wireless
network client to connect this router (maximum
transfer rate 300Mbps).
2.4 GHz (B+G): this mode only allows 802.11b and
802.11g wireless network client to connect this router
1
2
3
4
5
1
2
3
4
5

Rate

4.5 / 5 based on 2 votes.

Popular Hawking Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top