Page 31 / 151 Scroll up to view Page 26 - 30
30
Please choose the broadband (Internet connection) type you’re using in this
page. There are 5 supported types of Internet connection. They are:
Dynamic IP
- Please go to section 2-3-1
Static-IP xDSL
- Please go to section 2-3-2
PPPoE xDSL
- Please go to section 2-3-3
PPTP xDSL
- Please go to section 2-3-4
L2TP xDSL
- Please go to section 2-3-5
If you’re not sure, please contact your Internet service provider. A wrong
Internet connection type will cause problems and you will not be able to
connect to internet.
Page 32 / 151
31
2-3-1 Setup Procedure for Cable/Dynamic IP ISP
Host Name (1):
Please input the host name of your computer, this is
optional, and only required if your service provider
asks you to do so.
MAC address (2):
Please input MAC address of your computer here, if
your service provider only permits a computer with a
certain MAC address to access internet. If you’re using
the computer which is used to connect to Internet via
cable modem, you can simply press ‘Clone Mac
address’ button to fill the MAC address field with the
MAC address of your computer.
After you finish with all settings, please click ‘Continue’ (3) button; if you
want to go back to previous menu, click ‘Back’.
NOTE: Some service providers use ‘DHCP’ (Dynamic Host
Configuration Protocol) to assign IP address to you. In this case, you
can choose ‘Cable Modem’ as Internet connection type, even you’re
using another connection type, like xDSL. Also, some cable modem
uses PPPoE, so you can choose ‘PPPoE xDSL’ for such cable modem
connection, even you’re using a cable modem.
1
2
3
Page 33 / 151
2-3-2 Setup procedure for ‘Fixed-IP DSL’:
IP address (1):
Please input IP address assigned by your service
provider.
Subnet Mask (2):
Please input subnet mask assigned by your service
provider
Default Gateway (3): Please input the IP address of Default Gateway
provided by your service provider.
DNS Address(4)
Please input the IP address of DNS server
provided by your service provider.
When you finish with all settings, press ‘Continue’ (5); if you want to go
back to previous menu, click ‘Back’.
1
2
3
4
5
NOTE: You can choose this Internet connection method if your
service provider assigns a fixed IP address (also know as static
address) to you, and you are not using DHCP or PPPoE protocol.
Please contact your service provider for further information.
You must use the addresses provided by your Internet service
provider; a wrong setting value will cause connection problems.
Page 34 / 151
33
2-3-3 Setup procedure for ‘PPPoE DSL’:
User Name (1):
Please input user name assigned by your Internet
service provider here.
Password (2):
Please input the password assigned by your Internet
service provider here.
Service Name (3):
Please give a name to this Internet service, this is
optional
MTU (4):
Please input the MTU value of your network
connection here. If you don’t know, you can use default
value.
Connection
Please select the connection type of Internet
Type (5):
connection you wish to use (detailed explanation listed
1
2
4
3
5
6
7
Page 35 / 151
34
below).
Idle Time Out (6):
Please input idle time out, (detailed explanation listed
below).
When you finish with all settings, please click ‘Continue’ (7); if you want to
go back to previous menu, click ‘Back’.
MTU - Please use default value. If you need to change, please be sure
to contact your service provider for a proper value.
Connection Type - There are 3 options:
‘Continuous’ - keep internet connection alive, do not disconnect,
‘Connect on Demand’ - only connects to Internet when there’s a
connect attempt
‘Manual’ - only connects to Internet when ‘Connect’ button on this
page is pressed, and disconnects when ‘Disconnect button is
pressed.
Idle Time Out: Specify the time to shutdown internet after no internet
activity is detected. This option is only available when connection
type is ‘Connect on Demand’.

Rate

4.5 / 5 based on 2 votes.

Popular Hawking Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top