FRITZ WLAN-7390 Router Manual PDF (Setup & Configuration Guide)

Page 86 / 197 Scroll up to view Page 81 - 85

86

Operation at the Telephone

9.4

Operation at the Telephone

This section describes how you can use the FRITZ!Box fea-

tures via your telephone keypad.

Shortening the Dialing Procedure

The FRITZ!Box automatically recognizes when a number

has been entered, but not until a few seconds after the fi-

nal digits are entered.

You have the possibility of shortening the dialing proce-

dure by closing your entry with the

r

key.

Selecting the Outgoing Number and the Type of

Connection

For outgoing connections you can specify the kind of con-

nection to be used for the next dialing procedure. For this

entry you can use settings already made, or circumvent

the settings currently configured. In this case the dialing

rules are suspended for the given dialing procedure.

By entering precisely which Internet telephony account

should be used it is possible to have the dialing proce-

dure conducted via a certain Internet telephone number,

even though this number was never previously configured

for the extension used.

Shortening the Dialing Procedure

r

Indicates that a number has been dialed

to shorten the dialing procedure.

Page 87 / 197

Making Internal Calls

87

Making Internal Calls

All calls conducted between telephones connected to the

FRITZ!Box, be they analog or ISDN/DECT phones, are inter-

nal telephone calls.

Selecting the Outgoing Number and the Type of Connection

s111r

<telephone

number>

Dials up this connection using the

fixed line.

s12r

<telephone

number>

Establishes a connection for this dial-

ing procedure using the first Internet

telephone number.

s12

<P>

r

Establishes an Internet telephony

connection via the specified Internet

telephone number. For <P> enter the

position of the Internet telephone

number in the list of Internet tele-

phone numbers.

Dialing Internal Calls with Automatic Outside Dialing

N

Pick up the handset. You can hear the external

dial tone immediately, since the extension is set

for automatic outside dialing.

ss

<Ext.>

If you would like to make an internal call to one

of the extensions, dial

ss

, followed by the

number of the extension, for instance

1

or

2

.

ss50

If you would like to call all ISDN terminal devices

for which no number has been configured, then

dial

ss50

.

ss

<ISDN

ID>

If you would like to call an ISDN terminal device

for which you have defined an internal phone

number, dial

ss

followed by the internal num-

ber of the device (for instance,

51

).

ss5

<MSN>

If you would like to call an ISDN device that does

not have an internal phone number, dial

ss5

,

followed by the MSN that was saved in the ISDN

terminal device.

Page 88 / 197

88

Group Call

Place a group call to call all other extensions at the same

time. Your call is connected with whichever extension an-

swers first.

Picking up a Call from the Answering Machine

Use this function to pick up incoming calls on your tele-

phone that already have been taken by the answering ma-

chine.

Dialing Internal Calls without Automatic Outside Dialing

N

Pick up the handset. You hear the internal dial

tone.

<Ext.>

Dial the desired extension number. for instance

1

or

2

.

For instance, enter

ss1

, to call the telephone

at the analog extension

“

FON 1

”

.

If you would like to call an ISDN terminal device

for which you defined an internal phone number,

dial the internal phone number of the device (for

instance,

51

).

ss

<MSN>

If you would like to call an ISDN terminal device

that does not have an internal phone number, di-

al

5

, followed by the configured for the ISDN ter-

minal device.

Group Call

N

Pick up the handset.

ss9

Dial the keypad sequences listed here to call all

free extensions.

Picking up a Call

N

Pick up the handset.

s09

Dial the sequence shown at left.

P

The call is now connected to your extension. You

are now connected to the caller.

Page 89 / 197

Waiting Calls

89

Waiting Calls

When the “Call Waiting” feature is enabled and you are

conducting a call, you will be notified as soon as an exter-

nal call arrives on your your line. This call will be signaled

by an acoustic signal in the handset. You can accept the

connection with the new caller within 30 seconds. If you

ignore the signal, the waiting call is rejected after

30 seconds.

For instructions on how to enable and disable the func-

tion, see the section “Call Waiting” on page 81.

Call-back on Busy (CCBS) on the ISDN Line

When you dial a number and it is busy, you can enable the

“call-back on busy” feature. As soon as the line is free,

your telephone rings for 20 seconds, as it would for an ex-

ternal call. When you pick up your handset, the number of

desired party will be dialed automatically.

“Call-back on busy” can be used for both external and in-

ternal connections.

A maximum of five call-back requests can be enabled for

each extension at any given time.

Accepting or Rejecting Waiting Calls

R2

To accept a waiting call, dial the sequence

shown at left. Your original call is now on hold.

R1

To return to your original connection, dial the se-

quence shown at left. You can also accept the

waiting call by hanging up your existing connec-

tion, i.e., by hanging up the handset. In this case

the telephone rings as soon as you have hung

up. Pick up the handset again to accept the wait-

ing call.

R0

To reject a waiting call, dial the sequence shown

at left.

Page 90 / 197

90

Call-Back on No Response (CCNR) on the ISDN Line

The “call-back on no response” function can be used

when you dial a number and the party does not respond.

Once the party can be reached again and conducts a call

from her or his telephone, this function recognizes when

this conversation is ended. Your telephone then rings.

When you pick up your handset, the number of the desired

party is automatically dialed again.

“Call-back on no response” can be used both for external

and internal connections.

This command can be activated five times for each line.

Call-Back on Busy (CCBS)

M

You have just dialed a number and now you hear

the busy signal.

5

If the call is not answered, within 20 seconds,

dial either the number

5

or

Rs37r

the sequence shown at left.

Q

Wait for the acknowledgement tone.

O

Hang up the handset.

K

As soon as the subscriber you dialed hangs up,

your telephone will ring.

N

Pick up the handset. The subscriber’s number is

dialed again automatically.

Rate

Popular FRITZ Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share