FRITZ WLAN-7390 Router Manual PDF (Setup & Configuration Guide)

Page 71 / 197 Scroll up to view Page 66 - 70

Restoring Factory Settings

71

Restoring Factory Settings

All of the settings in the FRITZ!Box can be reset to their

condition upon delivery by restoring the factory settings.

After factory settings are restored, the FRITZ!Box is restarted.

Enabling and Disabling WLAN

The WLAN function can be switched on and off using the

telephone keypad. This is especially convenient when the

WLAN function has been switched off. Simply use your

telephone to turn it back on. This means that the WLAN

function can be enabled without having use a wired con-

nection to open the user interface.

Saving Permanently

N

Pick up the handset.

r91ss

Save all settings permanently by dialing the

sequence shown at left.

O

Hang up the handset.

All settings you made in the FRITZ!Box—including the con-

figured Internet connection—are deleted when the factory

settings are restored.

Restoring Factory Settings

r991s159

01590s

Restores all settings in the FRITZ!Box to

their original condition.

Enabling and Disabling WLAN

r96s1s

Enables the WLAN function.

r96s0s

Disables the WLAN function.

Page 72 / 197

72

Do Not Disturb

For every analog extension of the FRITZ!Box, the Do Not

Disturb option can be enabled by telephone. When Do Not

Disturb is set, the telephone connected to the extension

will not ring. In configuring this function you can choose

between enabling the function immediately or selecting a

specific time period.

Immediately

When Do Not Disturb is enabled immediately, no incoming

calls will be signaled at the specified extension. The Do

Not Disturb setting will remain enabled until it is disabled.

Period

Alternatively, you can enter a Do Not Disturb period during

which the telephone will not ring. At the extension for

which a Do Not Disturb period is to be configured, define

the period during which the telephone should not ring and

save your entries. Then enable Do Not Disturb. Do Not Dis-

turb then automatically will be switched on daily at the

time entered in the “Start” field and switched off again at

the time defined in the “End” field.

Example: Do Not Disturb should be configured from

8:00 p.m. until 7:00 a.m. daily. Enter the value “2000” for

<Start> and “0700” for <End>.

Disabling

Both kinds of Do Not Disturb settings can be disabled by

means of a keypad sequence.

Enabling Do Not Disturb Effective Immediately

r81

<Ext.>

s0s

Immediately enables Do Not Disturb for

the extension entered as <Ext>.

r91ss

Saves the settings.

Enabling Do Not Disturb for a Prescribed Period

r80

<Ext.>

s

<Start>

s

<End>

s

Defines the period for Do Not Disturb at

extension <Ext.>.

r91ss

Saves the settings.

r81

<Ext.>

s6s

Enables Do Not Disturb for the defined

period.

r91ss

Saves the settings.

Page 73 / 197

Alarm

73

Alarm

The telephones connected to the FRITZ!Box can be used

for an alarm call. The alarm can be configured individually

for each connected telephone.

First enter on the telephone the time at which you would

like to be awakened and save this entry.

Then enable the

alarm function.

Example: The telephone should ring at 07:00 a.m. Enter

the value “0700” as the <Time> and save this setting.

Disabling Do Not Disturb

r81

<Ext.>

s1s

Disables Do Not Disturb for extension

<Ext.>.

r91ss

Saves the settings.

Configuring the Alarm for a Telephone

r881s

<time>

s

<Ext.>

s

Defines for the given extension the

time at which the telephone should

ring.

r91ss

Saves the settings.

Enabling/Disabling the Alarm

r881ss

Enables the alarm for all extensions

on which a time was configured.

r881r

Disables the alarm for all extensions.

Page 74 / 197

74

Call Forwarding on the ISDN Line

Call forwarding is performed by the ISDN operator’s swit-

ching station. To use call forwarding, FRITZ!Box must be

connected to an ISDN line. Then this feature can be used

to forward calls to an external line. Call forwarding is sub-

ject to charges by the carrier and cannot be used to for-

ward calls to Internet numbers.

In addition to call forwarding, there is also call diversion

via the FRITZ!Box. Use call diversion to divert calls to inter-

nal and external lines. See the section “Call Diversion” on

page 78 for more information.

For call forwarding you may specify whether you want in-

coming calls to be forwarded unconditionally, after the

fifth ring, or when busy.

Different settings may be config-

ured separately for each number.

Call Forwarding

Immediately

Incoming calls for the given MSN are always diverted im-

mediately to the specified number. Call forwarding is sub-

ject to charges by the carrier and cannot be used to for-

ward calls to Internet numbers.

Do not activate both call forwarding and call diversion at

the same time.

Call Forwarding Immediately for Your Outgoing Caller ID

N

Pick up the handset.

s21s

<DNo>

r

Dial the sequence shown at left.

Q

Wait for the acknowledgement tone.

O

Hang up the handset.

Call Forwarding Immediately for Any MSN

N

Pick up the handset.

s21s

<DNo>

s

<MSN>

r

Dial the sequence shown at left.

Q

Wait for the acknowledgement tone.

O

Hang up the handset.

Page 75 / 197

Call Forwarding on the ISDN Line

75

Call Forwarding When

Busy

Incoming calls are forwarded to the specified number only

if a call is already being conducted using the number

dialed. You can define call diversion for the local outgoing

call number. The local outgoing call number is the first

number you assigned to an extension. You can also define

call diversion for any other number, e.g. a telephone at an-

other extension, or for all numbers. All settings can be dis-

abled at any time.

Call Forwarding Immediately for All MSNs

N

Pick up the handset.

s21s

<DNo>

sr

Dial the sequence shown at left.

Q

Wait for the acknowledgement tone.

O

Hang up the handset.

Disabling Call Forwarding Immediately for Your Outgoing Caller

ID

N

Pick up the handset.

s21sr

Dial the sequence shown at left.

Q

Wait for the acknowledgement tone.

O

Hang up the handset.

Disabling Call Forwarding Immediately for Any MSN

N

Pick up the handset.

s21ss

<MSN>

r

Dial the sequence shown at left.

Q

Wait for the acknowledgement tone.

O

Hang up the handset.

Disabling Call Forwarding Immediately for All MSNs

N

Pick up the handset.

s21ssr

Dial the sequence shown at left.

Q

Wait for the acknowledgement tone.

O

Hang up the handset.

Rate

Popular FRITZ Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share