FRITZ WLAN-7390 Router Manual PDF (Setup & Configuration Guide)

Home

Manuals

FRITZ

WLAN-7390

Page 81 / 197 Scroll up to view Page 76 - 80

Call Waiting

Call waiting can be switched on or off for each extension.

Some older terminal equipment connected to extensions

may misinterpret the call waiting signal. This is especially

true of fax machines and modems. If communication er-

rors occur, you should disable call waiting for fax and mo-

dem extensions.

See the section “Waiting Calls” on page 89 for information

about how to accept a call while another connection is ac-

tive.

When call waiting is enabled, modem and fax connec-

tions may be interrupted.

Enabling Call Waiting

Pick up the handset.

<Ext.>

s0s

Dial the sequence shown at left.

r91ss

Save your settings if desired by dial-

ing the sequence shown at left.

Hang up the handset.

Disabling Call Waiting

Pick up the handset.

<Ext.>

s1s

Dial the sequence shown at left.

r91ss

Save your settings if desired by dial-

ing the sequence shown at left.

Hang up the handset.

Page 82 / 197

Suppressing Caller ID for Outgoing Calls (CLIR)

The CLIR (Calling Line Identification Restriction) function

prevents your telephone number being displayed on the

other party’s telephone during outgoing calls.

The CLIR function is disabled in the factory settings. You

have the option of enabling this function permanently and

then disabling it again. CLIR can also be used for individu-

al connections. When CLIR is permanently enabled, this

setting is saved for the extension and always enabled for

outgoing connections.

If you would like to conduct only certain calls with the Call-

er ID suppressed, prefix the number dialed with a keypad

sequence. This enables CLIR only for the current connec-

tion.

Enabling CLIR Permanently

Pick up the handset.

<Ext.>

s1s

Dial the sequence shown at left.

r91ss

Save your settings if desired by dial-

ing the sequence shown at left.

Hang up the handset.

Disabling CLIR Permanently

Pick up the handset.

r51

<Ext.>

s0s

Dial the sequence shown at left.

r91ss

Save your settings if desired by dial-

ing the sequence shown at left.

Hang up the handset.

CLIR on a Case-by-Case Basis

Pick up the handset.

s31r

Dial the sequence shown at left. Now

you hear the external dial tone.

Dial the number you want to call.

Page 83 / 197

Displaying the Incoming Caller ID (CLIP)

The CLIP (Calling Line Identification Presentation) function

makes the number of callers—external and internal—visi-

ble on your telephone display.

The CLIP function is enabled in the factory settings. This

function can be permanently disabled and enabled again.

Connected ISDN Line Identification Restriction and

Presentation (COLR/COLP)

By default, a caller’s display always shows the Multiple

Subscriber Number (MSN) of the extension she or he

dialed. Yet if you take the call at another extension, the

MSN of this extension will be displayed. If you want this

number to remain concealed so that the caller does not

know that the call has been picked up at another exten-

sion, you have the option of suppressing transmission of

the connected line’s number. The caller’s display will con-

tinue to show the number dialed.

This feature is only effective if your telephone supports

CLIP.

Enabling Display of Incoming Caller ID (CLIP)

Pick up the handset.

r50

<Ext.>

s1s

Dial the sequence shown at left.

r91ss

Save your settings if desired by dial-

ing the sequence shown at left.

Hang up the handset.

Disabling Display of Incoming Caller ID (CLIP)

Pick up the handset.

r50

<Ext.>

s0s

Dial the sequence shown at left.

r91ss

Save your settings if desired by dial-

ing the sequence shown at left.

Hang up the handset.

Page 84 / 197

Disabling Automatic Outside Dialing

Transmission of the connected line’s number can be

switched on and off for each extension individually. Trans-

mission of the connected line’s number is permanently

enabled in the factory settings.

Disabling Automatic Outside Dialing

The FRITZ!Box offers the possibility of disabling automatic

outside dialing. This means that you will receive an inter-

nal dialing tone when you lift the handset at the corre-

sponding extension. This makes sense at any extension

which is used to make many internal calls, for instance,

between the extensions of the FRITZ!Box. When automatic

outside dialing is disabled, for an external call the “0”

must be dialed before the telephone number.

Enabling Connected Line Identification Restriction (COLR)

Permanently

Pick up the handset.

r53

<Ext.>

s1s

Dial the sequence shown at left.

r91ss

Save your settings if desired by dial-

ing the sequence shown at left.

Hang up the handset.

Enabling Connected Line Identification Presentation (COLP)

Permanently

Pick up the handset.

r53

<Ext.>

s0s

Dial the sequence shown at left.

r91ss

Save your settings if desired by dial-

ing the sequence shown at left.

Hang up the handset.

Page 85 / 197

Call Rejection on Busy (Busy on Busy)

Calls for an extension can be rejected using the “busy on

busy” feature. This means that the user receives a busy

signal whenever the extension is busy.

Disabling Automatic Outside Dialing

Pick up the handset.

<Ext.>

s0s

Dial the sequence shown at left.

r91ss

Save your settings if desired by dial-

ing the sequence shown at left.

Hang up the handset.

Enabling Automatic Outside Dialing

Pick up the handset.

<Ext.>

s1s

Dial the sequence shown at left.

r91ss

Save your settings if desired by dial-

ing the sequence shown at left.

Hang up the handset.

Enabling Busy on Busy

Pick up the handset.

r52

<Ext.>

s1s

Dial the sequence shown at left.

r91ss

Save your settings if desired by dial-

ing the sequence shown at left.

Hang up the handset.

Disabling Busy on Busy

Pick up the handset.

r52

<Ext.>

s0s

Dial the sequence shown at left.

r91ss

Save your settings if desired by dial-

ing the sequence shown at left.

Hang up the handset.

Rate

Popular FRITZ Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share