Page 81 / 108
Scroll up to view Page 76 - 80
ENHWI-2AN3 User’s Manual
Encore Electronics Inc.
Tel – (626) 336-4567
Fax – (626) 336-2345
Web Site – www.encore-usa.com
81
High/Low Priority Queue:
This can put the packets in the protocol and port
range to High/Low QoS Queue.
Bandwidth Allocation:
This can reserve / limit the throughput of specific protocols and port range. You
can set the upper bound and Lower bound.
Type:
Specify the direction of packets. Upload / Download or both.
IP range:
Specify the IP address range. You could also fill one IP address
Protocol:
Specify the packet type. The default ALL will put all packets in the QoS
priority Queue.
Page 82 / 108
ENHWI-2AN3 User’s Manual
Encore Electronics Inc.
Tel – (626) 336-4567
Fax – (626) 336-2345
Web Site – www.encore-usa.com
82
Port range:
Specify the Port range. You could also fill one Port.
Policy:
Specify the policy of QoS,
Min
option will reserve the selected data rate
in QoS queue.
Max
option will limit the selected data rate in QoS queue.
Rate:
The data rate of QoS queue.
Disabled:
This turn off QoS Service.
-
Routing
You can set Enable Static Routing to let the router forward packets using your routing
policy.
Page 83 / 108
ENHWI-2AN3 User’s Manual
Encore Electronics Inc.
Tel – (626) 336-4567
Fax – (626) 336-2345
Web Site – www.encore-usa.com
83
Destination LAN IP:
Specify the destination LAN IP address of static routing rule.
Subnet Mask:
Specify the Subnet Mask of static routing rule.
Default Gateway:
Specify the default gateway of static routing rule.
Hops:
Specify the Max Hops number of static routing rule.
Interface:
Specify the Interface of static routing rule.
TOOLS
-
Admin
Page 84 / 108
ENHWI-2AN3 User’s Manual
Encore Electronics Inc.
Tel – (626) 336-4567
Fax – (626) 336-2345
Web Site – www.encore-usa.com
84
You can change the password required to log into the broadband router's system
web-based management. By default, the password is: admin. Passwords can
contain 0 to 12 alphanumeric characters, and are case sensitive.
Old Password:
Fill in the current password to allow changing to a new
password.
New Password:
Enter your new password and type it again in
Repeat New
Password
for verification purposes
Remote managemen
t
Allows you to designate a host in the Internet. The ability to configure the
Broadband router from a remote site. Enter the designated host IP Address
in the Host IP Address field.
Page 85 / 108
ENHWI-2AN3 User’s Manual
Encore Electronics Inc.
Tel – (626) 336-4567
Fax – (626) 336-2345
Web Site – www.encore-usa.com
85
Host Address:
This is the IP address of the host in the Internet that will have
management/configuration access to the Broadband router from
a remote site. If the Host Address is left 0.0.0.0 this means
anyone can access the router’s web-based configuration from a
remote location, providing they know the password.
Port:
The port number of the remote management web interface.
Enabled:
Check to enable the remote management function.
Click <
Apply
> at the bottom of the screen to save the above configurations.
- Time
The Time Zone allows your router to refer or base its time on the settings
configured here, which will affect functions such as Log entries and Firewall
settings.
Setting Up Time:
Synchronize with the NTP server
19216811.live