Page 76 / 108
Scroll up to view Page 71 - 75
ENHWI-2AN3 User’s Manual
Encore Electronics Inc.
Tel – (626) 336-4567
Fax – (626) 336-2345
Web Site – www.encore-usa.com
76
Enable Trigger Port:
Enable or disable the Port Trigger function.
Trigger Port:
This is the outgoing (Outbound) range of port numbers for this
particular application.
Trigger Type:
Select whether the outbound port protocol is “
TCP
”, “
UDP
” or
“
BOTH
”.
Public Port:
Enter the In-coming (Inbound) port or port range for this type of
application (e.g. 2300-2400, 47624)
Public Type:
Select the Inbound port protocol type: “
TCP
”, “
UDP
” or “
BOTH
”
Popular Applications:
This section lists the more popular applications that
require multiple connections. Select an application
from the Popular Applications selection. Once you
have selected an application, select a location (1-5) in
the “Add” selection box and then click the <Add>
button. This will automatically list the Public Ports
Page 77 / 108
ENHWI-2AN3 User’s Manual
Encore Electronics Inc.
Tel – (626) 336-4567
Fax – (626) 336-2345
Web Site – www.encore-usa.com
77
required for this popular application in the location (1-
5) you specified.
Add Port Triggering
Fill in the "
Trigger
Port
", "
Trigger
Type
”, “
Public
Port
”, "
Public
Type
",
"
Public
Port
" and "
Description
" of the setting to be added and then Click
<Add>
. The Port Triggering setting will be added into the "
Current
Trigger-
Port Table
" below. If you happen to make a mistake, just click
<Reset>
and the fields will be cleared.
Remove Port Triggering
If you want to remove Special Application settings from the "
Current
Trigger-Port Table
", select the Port Triggering settings you want to remove
in the table and then click
<Delete
Selected>
. If you want remove all Port
Triggering settings from the table, just click the
<Delete All>
button. Click
<Reset>
will clear your current selections.
-
Application Layer Gateway (ALG)
You can select applications that need
ALG
support. The router will let the selected
application to correctly pass through the NAT gateway.
Page 78 / 108
ENHWI-2AN3 User’s Manual
Encore Electronics Inc.
Tel – (626) 336-4567
Fax – (626) 336-2345
Web Site – www.encore-usa.com
78
-
UPNP
With UPnP, all PCs in you Intranet will discover this router automatically. So, you
don’t have to configure your PC and it can easily access the Internet through this
router.
Page 79 / 108
ENHWI-2AN3 User’s Manual
Encore Electronics Inc.
Tel – (626) 336-4567
Fax – (626) 336-2345
Web Site – www.encore-usa.com
79
Enable / Disable UPnP:
You can enable or Disable the UPnP feature here.
After you enabled the UPnP feature, all client systems
that support UPnP, like Windows XP, can discover this
router automatically and access the Internet through this
router without having to configure anything. The NAT
Traversal
function
provided
by
UPnP
can
let
applications that support UPnP connect to the internet
without having to configure the virtual server sections.
- Quality of Service (QoS)
QoS lets you classify Internet application traffic by source/destination IP address
and port number. You can assign priority for each type of application and reserve
bandwidth for it. The packets of applications with higher priority will always go
first. Lower priority applications will get bandwidth after higher priority
applications get enough bandwidth. This can let you have a better experience in
Page 80 / 108
ENHWI-2AN3 User’s Manual
Encore Electronics Inc.
Tel – (626) 336-4567
Fax – (626) 336-2345
Web Site – www.encore-usa.com
80
using critical real time services like Internet phone, video conference …etc. All
the applications not specified by you are classified as rule “Others”.
Priority Queue
This can put the packets of specific protocols in High/Low Queue. The packets in
High Queue will process first.
Unlimited Priority Queue:
The LAN IP address will not be bounded in the QoS
limitation.
19216811.live