Page 61 / 108 Scroll up to view Page 56 - 60
ENHWI-2AN3 User’s Manual
Encore Electronics Inc.
Tel – (626) 336-4567
Fax – (626) 336-2345
Web Site – www.encore-usa.com
61
WPS via PIN:
You can fill-in the PIN code of the wireless device and press the
button to start the WPS process. The router will wait for the WPS
request from the wireless device within 2 minutes.
- Client List
WLAN Client Table shows the Wireless clients associated to this Wireless
Router.
-
Policy
The Broadband router can allow you to set up the Wireless Access Policy up to 4
SSID’s.
Page 62 / 108
ENHWI-2AN3 User’s Manual
Encore Electronics Inc.
Tel – (626) 336-4567
Fax – (626) 336-2345
Web Site – www.encore-usa.com
62
FIREWALL
The Broadband router provides extensive firewall protection by restricting connection
parameters, thus limiting the risk of hacker attacks, and defending against a wide
array of common Internet attacks. However, for applications that require unrestricted
access to the Internet, you can configure a specific client/server as a Demilitarized
Zone (DMZ).
Page 63 / 108
ENHWI-2AN3 User’s Manual
Encore Electronics Inc.
Tel – (626) 336-4567
Fax – (626) 336-2345
Web Site – www.encore-usa.com
63
Note:
To enable the Firewall settings select Enable and click Apply
- Advanced
You can allow the VPN packets to pass through this Broadband router.
- Demilitarized Zone (DMZ)
If you have a client PC that cannot run an Internet application (e.g. Games)
properly behind the NAT firewall, then you can open up the firewall restrictions to
unrestricted two-way Internet access by defining a DMZ Host. The DMZ function
allows you to re-direct all packets going to your WAN port IP address to a
Page 64 / 108
ENHWI-2AN3 User’s Manual
Encore Electronics Inc.
Tel – (626) 336-4567
Fax – (626) 336-2345
Web Site – www.encore-usa.com
64
particular IP address in your LAN. The difference between the virtual server and
the DMZ function is that the virtual server re-directs a particular service/Internet
application (e.g. FTP, websites) to a particular LAN client/server, whereas DMZ
re-directs all packets (regardless of services) from your WAN IP address to a
particular LAN client/server.
Enable DMZ:
Enable / Disable DMZ
LAN IP Address:
Fill-in the IP address of a particular host in your LAN Network
or select a PC from the list on the right that will receive all the
packets originally from the WAN port/Public IP address.
Click
<Apply>
at the bottom of the screen to save the above configurations.
-
Denial of Service (DoS)
The Broadband router's firewall can block common hacker attacks, including Denial
of Service, Ping of Death, Port Scan and Sync Flood. If Internet attacks occur the
router can log the events.
Page 65 / 108
ENHWI-2AN3 User’s Manual
Encore Electronics Inc.
Tel – (626) 336-4567
Fax – (626) 336-2345
Web Site – www.encore-usa.com
65
Flood:
Protects the router from Sync Flood attack.
-
MAC Filter
If you want to restrict users from accessing certain Internet applications / services
(e.g. Internet websites, email, FTP etc.), and then this is the place to set that
configuration. MAC Filter allows users to define the traffic type permitted in your
LAN. You can control which PC client can have access to these services.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top