Page 101 / 108
Scroll up to view Page 96 - 100
ENHWI-2AN3 User’s Manual
Encore Electronics Inc.
Tel – (626) 336-4567
Fax – (626) 336-2345
Web Site – www.encore-usa.com
101
Old Password:
Fill-in the current password to be replaced. This is required to
allow changing to a new password.
New Password:
Enter your new password and again in
Repeat New Password
for verification purpose
Click
<Apply>
at the bottom of the screen to save the above configurations
-
Time
The Time Zone allows your router to use external source to time
synchronizations. This affects other functions such as Event Log entries and
Schedule settings that use time to do its tasks.
How to Set up Time:
Synchronize with the NTP server
Page 102 / 108
ENHWI-2AN3 User’s Manual
Encore Electronics Inc.
Tel – (626) 336-4567
Fax – (626) 336-2345
Web Site – www.encore-usa.com
102
Time Zone:
Select the time zone of the country you are located. The router
will set its time based on your selection.
NTP Time Server:
Enter the NTP Time Server address or URL here. This
also accepts local the IP address if the NTP Time
Server is on the same LAN.
Daylight Savings:
The router can also setup to automatically adjust the
Daylight Savings Time changes each time DST
changes. To use this feature, click to put a checkmark
on the Enable box then enter the dates the DST would
starts and ends.
Click <
Apply
> at the bottom of the screen to save the above configurations
Synchronize and use your computer’s clock
The ENHWI-2AN3 can be synchronized the time to your computer’s time.
Page 103 / 108
ENHWI-2AN3 User’s Manual
Encore Electronics Inc.
Tel – (626) 336-4567
Fax – (626) 336-2345
Web Site – www.encore-usa.com
103
PC Date and Time:
This field would display the user computers date and time.
Daylight Savings:
The router can also setup to automatically adjust the Daylight
Savings Time changes each time DST changes. To use this
feature, click to put a checkmark on the Enable box then enter
the dates the DST would starts and ends.
Click
<Apply>
at the bottom of the screen to save the above configurations.
- Diagnosis
This page lets you diagnose the connection problem and the network status by
executing the Ping function. The result tells you whether the connection is broken or
successful.
Page 104 / 108
ENHWI-2AN3 User’s Manual
Encore Electronics Inc.
Tel – (626) 336-4567
Fax – (626) 336-2345
Web Site – www.encore-usa.com
104
- Firmware
This page allows you to upgrade the router’s firmware. To upgrade the firmware of
your Broadband router, you need to download the firmware file to your local hard
disk, and enter that file name and path in the appropriate field on this page. You can
also use the Browse button to find the firmware file on your PC.
Once you’ve selected the new firmware file, click <
Apply
> at the bottom of the
screen to start the upgrade process. Warning: Once the loading of the new
firmware started, do not power down the router.
- Back-up
The page allows you to save (Backup) the router’s current configuration settings.
Page 105 / 108
ENHWI-2AN3 User’s Manual
Encore Electronics Inc.
Tel – (626) 336-4567
Fax – (626) 336-2345
Web Site – www.encore-usa.com
105
The saved backup can be restored again if needed by using the
Restore
Settings
selection and browse the saved backup file to restore back to the
expected settings. If restore is not an option the
Restore to Factory Default
may
be the only way to recover the router from damage.
Using Restore to Factory
Default
will reset all configurations and settings to its original factory default
settings (e.g. when you first purchased the router).
Backup Settings:
Use this function to save the router’s current settings and
configuration to a file named "
config.bin
" to your computer.
You can also use the
<Upload>
button to restore the saved
configuration to the router. Alternatively, you can use the
"
Restore to Factory Defaults
" to force the Broadband
router to perform a power reset and restore the original
factory settings.
19216811.live