Page 46 / 131
Scroll up to view Page 41 - 45
45
2-5
Setup Internet Connection (WAN Setup)
Internet connections setup can be done by using ‘Quick Setup’ menu
described in chapter 2-3. However, you can setup WAN connections up by
using WAN configuration menu. You can also set advanced functions like
DDNS (Dynamic DNS) here.
To start configuration, please follow the following instructions:
Please click ‘WAN’ menu on the left of web management interface, and the
following message will be displayed on your web browser:
Please select an Internet connection method depend on the type of connection
you’re using. You can either click the connection method on the left
or
right . If you select the connection method on the right, please click ‘More
Configuration’ button after a method is selected.
Dynamic IP
- Please go to section 2-5-1
Static IP
- Please go to section 2-5-2
PPPoE
- Please go to section 2-5-3
PPTP
- Please go to section 2-5-4
L2TP
- Please go to section 2-5-5
Telstra Big Pond
- Please go to section 2-5-6
DNS
- Please go to section 2-5-7
DDNS
- Please go to section 2-5-8
Page 47 / 131
46
2-5-1 Setup procedure for ‘Dynamic IP’:
Here are descriptions of every setup items:
Host Name :
Please input host name of your computer, this is
optional, and only required if your service provider
asks you to do so.
MAC Address :
Please input MAC address of your computer, if your
service provider only permits computer with certain
MAC address to access internet. If you’re using the
computer which used to connect to Internet via cable
modem, you can simply press ‘Clone Mac address’
button to fill the MAC address field with the MAC
address of your computer,
After you finish with all settings, please click ‘Apply’ ; if you want to
remove and value you entered, please click ‘Cancel’.
After you click ‘Apply’, the following message will be displayed on your
web browser:
Page 48 / 131
47
Please click ‘Continue’
to back to previous setup menu; to continue on
router setup, or click ‘Apply’ to reboot the router so the settings will take
effect (Please wait for about 50 seconds while router is rebooting).
Page 49 / 131
48
2-5-2 Setup procedure for ‘Static IP’:
Here are descriptions of every setup items:
IP address assigned
Please input IP address assigned
by your Service
by your service provider.
Provider :
Subnet Mask :
Please input subnet mask assigned by your service
provider
Service Provider
Please input the IP address of DNS
Gateway Address :
server provided by your service provider.
After you finish with all settings, please click ‘Apply’
button, and the
following message will be displayed on your web browser:
Page 50 / 131
49
Please click ‘Continue’ to back to previous setup menu; to continue on other
setup procedures, or click ‘Apply’ to reboot the router so the settings will
take effect (Please wait for about 50 seconds while router is rebooting).
If you want to reset all settings in this page back to previously-saved value,
please click ‘Cancel’ button.
19216811.live