Page 36 / 131
Scroll up to view Page 31 - 35
35
2-3-5 Setup procedure for ‘L2TP xDSL’:
L2TP is another popular connection method for xDSL and other Internet
connection types, and all required setting items are the same with PPTP
connection.
Like PPTP, there are two kinds of required setting, we’ll start from ‘WAN
Interface Settings’:
Please select the type of how you obtain IP address from your service
provider here. You can choose ‘Obtain an IP address automatically’ (equal to
DHCP, please refer to ‘Cable Modem’ section above), or ‘Use the following
IP address’ (equal to static IP address, please refer to ‘PPPoE xDSL’ section
above).
WAN interface settings must be correctly set, or the Internet connection will
fail even those settings of PPTP settings are correct. Please contact your
Internet service provider if you don’t know what you should fill in these
fields.
Page 37 / 131
36
2-3-5 Setup procedure for ‘L2TP’:
Here are descriptions of every setup items:
User ID (1):
Please input user ID (user name) assigned by your
Internet service provider here.
Password :
Please input the password assigned by your Internet
service provider here.
L2TP Gateway :
Please input the IP address of PPTP gateway assigned
by your Internet service provider here.
MTU :
Please input the MTU value of your network connection
here. If you don’t know, you can use default value.
Connection
Please select the connection type of Internet
type :
connection you wish to use, please refer to last section
for detailed descriptions.
Idle Time
Please input the idle time out of Internet
Out :
connection you wish to use, and refer to last section for
detailed descriptions.
When you finish with all settings, please click ‘OK ; if you want to go back
to previous menu, click ‘Back’.
7
Page 38 / 131
37
2-3-6 Setup procedure for ‘Telstra Big Pond’:
This setting only works when you’re using Telstra big pond’s network
service in Australia. You need to input:
User Name :
Please input the user name assigned by Telstra.
Password :
Please input the password assigned by Telstra.
User device login
Check this box to choose login
server manually :
server by yourself.
Login Server :
Please input the IP address of login server here.
When you finish with all settings, click ‘OK ; if you want to go back to
previous menu, click ‘Back’.
When all settings are finished, you’ll see the following message displayed on
your web browser:
Please click ‘Apply’ button to prepare to restart the router, and you’ll see this
message:
Page 39 / 131
38
Please wait for about 50 seconds, then click ‘OK!’ button. You’ll be back to
router management interface again, and the router is ready with new settings.
Page 40 / 131
39
2-4 Basic Setup
In this chapter, you’ll know how to change the time zone, password, and
remote management settings. Please start your web browser and log onto
router web management interface, then click ‘General Setup’ button on the
left, or click ‘General Setup’ link at the upper-right corner of web
management interface.
2-4-1 Time zone and time auto-synchronization
Please follow the following instructions to set time zone and time
auto-synchronization parameters:
Please click ‘System’ menu on the left of web management interface, then
click ‘Time Zone’, and the following message will be displayed on your web
browser: Please select time zone at ‘Set time zone’ drop-down list, and input
the IP address or host name of time server. If you want to enable daylight
savings setting, please check ‘Enable Function’ box, and set the duration of
daylight setting. When you finish, click ‘Apply’. You’ll see the following
message displayed on web browser:
HERE!
19216811.live