1. Home
    2. /
  2. Manuals
    3. /
  3. EDIMAX
    4. /
  4. BR-6504n
    5. /
  5. 11
Page 51 / 131 Scroll up to view Page 46 - 50
50
2
-5-3 Setup procedure for ‘PPPoE’:
User Name :
Please input user name assigned by your Internet
service provider here.
Password :
Please input the password assigned by your Internet
service provider here.
Service Name :
Please give a name to this Internet service, this is
optional
MTU :
Please input the MTU value of your network connection
here. If you don’t know, you can use default value.
Connection
Please select the connection type of Internet
Type :
connection you wish to use (detailed explanation listed
below).
Idle Time Out :
Please input idle time out, (detailed explanation listed
below).
After you finish with all settings, please click ‘Apply’
button, and the
following message will be displayed on your web browser:
Page 52 / 131
51
Please click ‘Continue’ to back to previous setup menu; to continue on other
setup procedures, or click ‘Apply’ to reboot the router so the settings will
take effect (Please wait for about 50 seconds while router is rebooting).
If you want to reset all settings in this page back to previously-saved value,
please click ‘Cancel’ button.
2-5-4 Setup procedure for ‘PPTP’:
PPTP requires two kinds of setting: WAN interface setting (setup IP address)
and PPTP setting (PPTP user name and password). Here we start from WAN
interface setting:
Select the type of how you obtain IP address from your service provider here.
You can choose ‘Obtain an IP address automatically’ (equal to DHCP, please
refer to ‘Cable Modem’ section above), or ‘Use the following IP address’ (i.e.
static IP address)
Page 53 / 131
52
WAN interface settings must be correctly set, or the Internet connection will
fail even those settings of PPTP settings are correct. Please contact your
Internet service provider if you don’t know what you should fill in these
fields.
Now please go to PPTP settings section:
Here are descriptions of every setup items:
User ID :
Please input user ID (user name) assigned by your
Internet service provider here.
Password :
Please input the password assigned by your Internet
service provider here.
PPTP Gateway :
Please input the IP address of PPTP gateway assigned
by your Internet service provider here.
Connection ID :
Please input the connection ID here, this is optional
and you can leave it blank.
MTU :
Please input the MTU value of your network connection
here. If you don’t know, you can use default value.
Connection
Please select the connection type of Internet
type :
connection you wish to use, please refer to last section
for detailed descriptions.
Idle Time Out :
Please input the idle time out of Internet connection you
wish to use, and refer to last section for detailed
descriptions.
8
Page 54 / 131
53
Setting item ‘BEZEQ-ISRAEL’ is only required to check if you’re using the
service provided by BEZEQ network in Israel.
When you finish with all settings, please click ‘OK ; if you want to go back
to previous menu, click ‘Back’.
2-5-5 Setup procedure for ‘L2TP’:
Here are descriptions of every setup items:
User ID :
Please input user ID (user name) assigned by your Internet
service provider here.
Password :
Please input the password assigned by your Internet service
provider here.
L2TP
Please input the IP address of PPTP gateway
Gateway :
assigned by your Internet service provider here.
MTU :
Please input the MTU value of your network connection
here. If you don’t know, you can use default value.
Connection
Please select the connection type of Internet connection
type :
you wish to use, please refer to last section for detailed
descriptions.
Idle Time
Please input the idle time out of Internet connection
Out :
you wish to use, and refer to last section for detailed
descriptions.
7
Page 55 / 131
54
When you finish with all settings, please click ‘OK ; if you want to go back
to previous menu, click ‘Back’.
2-5-6 Setup procedure for ‘Telstra Big Pond’:
This setting only works when you’re using Telstra big pond’s network
service in Australia. You need to input:
User Name :
Please input the user name assigned by Telstra.
Password :
Please input the password assigned by Telstra.
User device login
Check this box to choose login server by yourself.
server manually :
Login Server :
Please input the IP address of login server here.
When you finish with all settings, click ‘OK ; if you want to go back to
previous menu, click ‘Back’.

Rate

4 / 5 based on 1 vote.

Popular EDIMAX Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top