Page 66 / 97
Scroll up to view Page 61 - 65
Page 67 / 97
62
3.3.10.1 Port Mapping
Choose
ADVANCED
>
Network Tools
and click
Port
Mapping
. The page shown in the following figure appears.
In
this page,
you can bind the WAN interface and the LAN
interface to the same group.
Click
Add
to add a new port mapping. The page shown in the
following figure appears.
Page 68 / 97
63
The procedure for creating a mapping group is listed as
follows:
Step 1
Enter the group name.
Step 2
Select interfaces from the
Available Interface
list and
click the
<-
arrow button to add them to the grouped
interface list, in order to create the required mapping
of the ports. The group name must be unique.
Step 3
Click
Submit
to save the settings.
Page 69 / 97
64
3.3.10.2 IGMP Proxy
Choose
ADVANCED
>
Network Tools
and click
IGMP Proxy
.
The page shown in the following figure appears.
IGMP proxy enables the system to issue IGMP host
messages on behalf of hosts that the system discovered
through standard IGMP interfaces. The system acts as a
proxy for its hosts after you enable it.
Click
Apply
to save the settings.
3.3.10.3 IGMP Snooping
Choose
ADVANCED
>
Network Tools
and click
IGMP
Snooping
. The page shown in the following figure appears.
Page 70 / 97
65
After configuration, click
Apply
to save the settings.
3.3.10.4 UPnP
Choose
ADVANCED
>
Network Tools
and click
UPnP
. The
page shown in the following figure appears.