Page 56 / 97
Scroll up to view Page 51 - 55
51
Enter the
Filter Name
and specify at least one of the
following criteria: protocol, source/destination IP address,
subnet mask, and source/destination port. Click
Apply
to
save the settings.
3.3.5.3 Bridge Filtering
In the
Filtering Options
page, click
Bridge Filtering
. The
page shown in the following figure appears.This page is used
to configure bridge parameters. In this page, you can change
the settings or view some information of the bridge and
attached ports.
Click
Add
to add a bridge filter. The page shown in the
following figure appears.
Page 57 / 97
52
Click
Apply
to save the settings.
3.3.6
QoS Configuration
Choose
ADVANCED
>
QOS Config
. The QoS Configuration
page shown in the following figure appears.
Page 58 / 97
53
3.3.6.1 QoS Interface
In the QoS Configuration page, click
QoS Interface Config
.
The page shown in the following figure appears. In this page,
you can configure bandwidth control.
Click
Edit
, the page shown in the following figure appears.
After configuration, click
Apply
to make configurations take
effect.
Page 59 / 97
54
3.3.6.2 QoS Queue Configuration
In the QoS Configuration page, click
QoS Queue Config
. The
page shown in the following figure appears. In this page, you
can configure the priority of queue.
Click
Add
, the page shown in the following figure appears.
After configuration, click
Apply
to take the configurations
effect.
3.3.6.3 QoS Classify Configuration
In the QoS Configuration page, click
QoS Classify
Configuration
. The page shown in the following figure
appears. In this page, you can assign a QoS classification.
Page 60 / 97
55
Click
Add
, the page shown in the following figure appears.
19216811.live