Page 51 / 97
Scroll up to view Page 46 - 50
46
Enter the user name and MAC address and select the
corresponding time and days. Click
Submit
to add the MAC
address to the
BLOCK MAC ADDRESS Table
.
Page 52 / 97
47
3.3.5
Filtering Options
Choose
ADVANCED
>
Filtering Options
. The
Filtering
Options
page shown in the following figure appears.
3.3.5.1 Inbound IP Filtering
By default, all incoming IP traffic that does not originate from
the internal network is blocked when the firewall is enabled.
Normal outbound requests created by web browsing, email
and other software you run, work as usual as the requests
originated from your internal network. The inbound filter
allows you to create a filter rule to allow incoming IP traffic by
specifying a filter name and you need to select at least one
condition.
In the
Filtering Options
page, click
Inbound IP Filtering
.
The page shown in the following figure appears.
Page 53 / 97
48
Click
Add
to add an inbound IP filter. The page shown in the
following figure appears.
Page 54 / 97
49
Enter the
Filter Name
and specify at least one of the
following criteria: protocol, source/destination IP address,
subnet mask, and source/destination port.
Click
Apply
to save the settings.
Note:
The settings only apply when the firewall is enabled.
The
ACTIVE INBOUND FILTER
shows detailed information
about every created inbound IP filter. Click
Delete
to remove
an IP filter (only appears when an IP filter exists).
3.3.5.2 Outbound IP Filtering
By default, all outgoing IP traffic from the LAN is allowed. The
outbound filter allows you to create a filter rule to block outgoing
IP traffic by specifying a filter name and at least one condition.
Page 55 / 97
50
In the
Filtering Options
page, click
Outbound IP Filtering
.
The page shown in the following figure appears.
Click
Add
to add an outbound IP filter. The page shown in the
following figure appears.
19216811.live