1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor2860Vn-plus
    5. /
  5. 151
Page 751 / 794 Scroll up to view Page 746 - 750
Vigor2860 Series User’s Guide
737
“oname=admin” means to set Username = admin.
opwd
It means Dial-Out Password
“opwd=1234” means to set Password = 1234.
pauth
It means PPP Authentication.
“pauth=pc” means to set PPP Authentication =
PAP&CHAP.
“pauth=p” means to set PPP Authentication = PAP Only
ovj
It means VJ Compression.
“ovj=on/off” means to enable/disable VJ Compression.
okey
It means IKE Pre-Shared Key.
“okey=abcd” means to set IKE Pre-Shared Key = abcd.
ometh
It means IPSec Security Method.
“ometh=ah/” means AH.
“ometh=espd/espda/” means ESP DES without/with
Authentication.
“ometh=esp3/esp3a/” means ESP 3DES without/with
Authentication.
“ometh=espa/espaa” means ESP AES without/with
Authentication.
sch
It means Index(1-15) in Schedule Setup.
sch=1,3,5,7 Set schedule 1->3->5->7
rcallb
It means Require Remote to Callback.
“rcallb=on/off” means to enable/disable Set Require
Remote to Callback.
ikeid
It means IKE Local ID.
“ikeid=vigor” means Set Local ID = vigor.
For Dial-In Settings
itype
It means Allowed Dial-In Type. Available settings
include:
“itype=t” means PPTP.
Page 752 / 794
Vigor2860 Series User’s Guide
738
“itype=s” means IPSec.
“itype=L1”means L2TP (None).
“itype=L1” means L2TP(Nice to Have).
“itype=l2” means L2TP(Must).
peer
It means specify Peer VPN Server IP for Remote VPN
Gateway.
Type “203.12.23.48” means to allow VPN dial-in with IP
address of 203.12.23.48.
Type “off” means any remote IP is allowed to dial in.
peerid
It means the peer ID for Remote VPN Gateway.
Type “draytek” means the word is used as local ID.
iname
It means Dial-in Username.
“iname=admin” means to set username as “admin”.
ipwd
It means Dial-in Password.
“ipwd=1234” means to set password as “1234”.
ivj
It means VJ Compression.
“ivj=on/off” means to enable /disable VJ Compression.
ikey
It means IKE Pre-Shared Key.
“ikey=abcd” means to set IKE Pre-Shared Key = abcd.
imeth
It means IPSec Security Method
“imeth=h” means “Allow AH”.
“imeth=d” means “Allow DES”.
“imeth=3” means “Allow 3DES”.
“imeth=a” means “Allow AES.
For TCP/IP Settings
mywip
It means My WAN IP.
“mywip=1.2.3.4” means to set My WAN IP as “1.2.3.4”.
rgip
It means Remote Gateway IP.
“rgip=1.2.3.4” means to set Remote Gateway IP as
“1.2.3.4”.
Page 753 / 794
Vigor2860 Series User’s Guide
739
rnip
It means Remote Network IP.
“rnip=1.2.3.0” means to set Remote Network IP as
“1.2.3.0”.
rnmask
It means Remote Network Mask.
“rnmask=255.255.255.0” means to set Remote Network
Mask as “255.255.255.0”.
rip
It means RIP Direction.
“rip=d” means to set RIP Direction as “Disable”.
“rip=t” means to set RIP Direction as “TX”.
“rip=r” means to set RIP Direction as “RX”.
“rip=b” means to set RIP Direction as “Both”.
mode
It means the option of “From first subnet to remote
network, you have to do”.
“mode=r” means to set Route mode.
“mode=n” means to set NAT mode.
droute
It means to Change default route to this VPN tunnel
( Only single WAN supports this).
droute=on/off means to enable/disable the function.
Example
> vpn option 1 idle=250
% Change Log..
% Idle Timeout = 250
Telnet Command: vpn mroute
This command allows users to list, add or delete static routes for a certain LAN to LAN VPN
profile.
vpn mroute
<index>
list
vpn mroute
<index>
add
<network ip>/<mask>
vpn mroute
<index>
del
<network ip>/<mask>
Syntax Description
Page 754 / 794
Vigor2860 Series User’s Guide
740
Parameter
Description
list
It means to display all of the route settings.
add
It means to add a new route.
del
It means to delete specified route.
<index>
It means the index number of the profile.
Available index numbers:
1 ~ 32
<network ip>/<mask>
Type the IP address with the network mask address.
Example
> vpn mroute 1 add 192.168.5.0/24
% 192.168.5.0/24
% Add new route 192.168.5.0/24 to profile 1
Telnet Command: vpn list
This command allows users to view LAN to LAN VPN profiles.
vpn list
<index>
all
vpn list
<index>
com
vpn list
<index>
out
vpn list
<index>
in
vpn list
<index>
net
Syntax Description
Parameter
Description
all
It means to list configuration of the specified profile.
com
It means to list common settings of the specified profile.
out
It means to list dial-out settings of the specified profile.
in
It means to list dial-in settings of the specified profile.
net
It means to list Network Settings of the specified profile.
<index>
It means the index number of the profile.
Available index numbers:
1 ~ 32
Page 755 / 794
Vigor2860 Series User’s Guide
741
Example
>
vpn list 32 all
% Common Settings
% Profile Name
: ???
% Profile Status
: Disable
% Netbios Naming Packet
: Pass
% Call Direction
: Both
% Idle Timeout
: 300
% PING to keep alive
: off
% Dial-out Settings
% Type of Server
: PPTP
% Link Type:
: 64k bps
% Username
: ???
% Password
:
% PPP Authentication
: PAP/CHAP
% VJ Compression
: on
% Pre-Shared Key
:
% IPSec Security Method
: AH
% Schedule
: 0,0,0,0
% Remote Callback
: off
% Provide ISDN Number
: off
% IKE phase 1 mode
: Main mode
% IKE Local ID
:
% Dial-In Settings
--- MORE ---
['q': Quit, 'Enter': New Lines, 'Space Bar': Next Page] ---
> vpn list 1 com
% Common Settings
% Profile Name
: ???
% Profile Status
: Disable
% Netbios Naming Packet : Pass
% Call Direction
: Both

Rate

4.5 / 5 based on 2 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top