1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor2860Vn-plus
    5. /
  5. 147
Page 731 / 794 Scroll up to view Page 726 - 730
Vigor2860 Series User’s Guide
717
> sys britask on
% bridge task is ON, now
Telnet Command: sys tr069
This command can set CPE settings for applying in VigorACS.
sys tr069
get
[parm] [option]
sys tr069 set
[parm] [value]
sys tr069 getnoti
[parm]
sys tr069 setnoti
[parm] [value]
sys tr069 log
sys tr069 debug
[on/off]
sys tr069 save
sys tr069 inform
[event code]
sys tr069
port
[port num]
sys tr069 cert_auth
[on/off]
Syntax Description
Parameter
Description
get [parm] [option]
It means to get parameters for tr-069.
option=<nextlevel>: only gets nextlevel for
GetParameterNames.
set [parm] [value]
It means to set parameters for tr-069.
getnoti
[parm]
It means to get parameter notification value.
setnoti
[parm] [value]
It means to set parameter notification value.
log
It means to display the TR-069 log.
debug [on/off]
on: turn on the function of sending debug message to
syslog.
off: turn off the function of sending debug message to
syslog.
save
It means to save the parameters to the flash memory of
the router.
Inform [event code]
It means to inform parameters for tr069 with different
event codes.
[event code] includes:
Page 732 / 794
Vigor2860 Series User’s Guide
718
0-"0 BOOTSTRAP",
1-"1 BOOT",
2-"2 PERIODIC",
3-"3 SCHEDULED",
4-"4 VALUE CHANGE",
5-"5 KICKED",
6-"6 CONNECTION REQUEST",
7-"7 TRANSFER COMPLETE",
8-"8 DIAGNOSTICS COMPLETE",
9-"M Reboot"
port [port num]
It means to change tr069 listen port number.
cert_auth
[on/off]
on: turn on certificate-based authentication.
off: turn off certificate-based authentication.
Example
> sys tr069 get Int. nextlevel
Total number of parameter is 24
Total content length of parameter is 915
InternetGatewayDevice.LANDeviceNumberOfEntries
InternetGatewayDevice.WANDeviceNumberOfEntries
InternetGatewayDevice.DeviceInfo.
InternetGatewayDevice.ManagementServer.
InternetGatewayDevice.Time.
InternetGatewayDevice.Layer3Forwarding.
InternetGatewayDevice.LANDevice.
InternetGatewayDevice.WANDevice.
InternetGatewayDevice.Services.
InternetGatewayDevice.X_00507F_InternetAcc.
InternetGatewayDevice.X_00507F_LAN.
InternetGatewayDevice.X_00507F_NAT.
InternetGatewayDevice.X_00507F_Firewall.
InternetGatewayDevice.X_00507F_Bandwidth.
InternetGatewayDevice.X_00507F_Applications.
Page 733 / 794
Vigor2860 Series User’s Guide
719
InternetGatewayDevice.X_00507F_VPN.
InternetGatewayDevice.X_00507F_VoIP.
InternetGatewayDevice.X_00507F_WirelessLAN.
InternetGatewayDevice.X_00507F_System.
InternetGatewayDevice.X_00507F_Status.
InternetGatewayDevice.X_00507F_Diagnostics.
--- MORE ---
['q': Quit, 'Enter': New Lines, 'Space Bar': Next Page]
---
Telnet Command: sys sip_alg
This command can turn on/off SIP ALG (Application Layer Gateway) for traversal.
sys sip_alg
[1]
sys sip_alg
[0]
Syntax Description
Parameter
Description
1
It means to turn on SIP ALG.
0
It means to turn off SIP ALG.
Example
> sys sip_alg ?
usage: sys sip_alg [value]
0 - disable SIP ALG
1 - enable SIP ALG
current SIP ALG is disabled
Telnet Command: sys license
This command can process the system license.
sys license
licmsg
sys license
licauth
sys license
regser
sys license
licera
sys license
licifno
sys license
lic_wiz [set/reg/qry]
sys license
dev_chg
sys license
dev_key
Page 734 / 794
Vigor2860 Series User’s Guide
720
Syntax Description
Parameter
Description
licmsg
It means to display license message.
licauth
It means the license authentication time setting.
regser
It means the license register server setting.
licera
It means to erase license setting.
licifno
It means license and signature download interface
setting.
lic_wiz [set/reg/qry]
It means the license wizard setting.
qry: query service support status
set [idx] [trial] [service type] [sp_id] [start_date] [License
Key]
reg: register service in portal
dev_chg
It means to change the device key.
dev_key
It means to show device key.
Example
> sys license licifno
License and Signature download interface setting:
licifno [AUTO/WAN#]
Ex: licifno wan1
Download interface is "auto-selected" now.
Telnet Command: sys diag_log
This command is used for RD debug.
sys diag_log
[status| enable| disable| flush| lineno [w] | level [x] | feature [on|off] [y]| log]
Syntax Description
Parameter
Description
status
It means to show the status of diagnostic log.
Page 735 / 794
Vigor2860 Series User’s Guide
721
enable
It means to enable the function of diag_log.
disable
It means to disenable the function of diag_log.
flush
It means the flush log buffer.
lineno [w]
It means the total lines for displaying message.
w - Available value ranges from 100 to 50000.
level[x]
It determines the level of data displayed.
x – Available value ranges from 0 to 12. The larger the
number is, the detailed the data is displayed.
feature [on/off][y]
It is used to specify the function of the log. Supported
features include SYS and DSL (Case-Insensitive).
Default setting is “on” for “DSL”.
voip_feature
[on/off][vf_name]
It means VoIP feature. Type on to enable the feature or
type off to disable the feature.
vf_name: available settings include DRVTAPI,
DRVVMMC, DRVMPS, DRVFXO, DRVHAL,
PSMPHONE, PSMSUPP, PSM, FXO, PSMISDN,
DTMFPSER, CALLERID (Case-Insensitive).
log
It means the dump log buffer.
Example
> sys diag_log status
Status:
diag_log is Enabled.
lineno : 10000.
level : 3.
Enabled feature: SYS DSL
> sys diag_log log
0:00:02
[DSL] Current modem firmware: AnnexA_548006_544401
0:00:02
[DSL] Modem firmware feature: 5, ADSL_A, VDSL2
0:00:02
[DSL] xtseCfg=04 00 04 00 0c 01 00 07
0:00:02
[DSL] don't have last showtime mode!! set next mode to VDSL!!
0:00:02
[DSL] Status has changed: Stopped(0) -> FwWait(3)
0:00:02
[DSL] Status has changed: FwWait(3) -> Starting(1)

Rate

4.5 / 5 based on 2 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top