Page 741 / 794
Scroll up to view Page 736 - 740
Vigor2860 Series User’s Guide
727
Telnet Command: upnp wan
This command is used to specify WAN interface to apply UPnP.
upnp wan
[n]
Syntax Description
Parameter
Description
n
It means to specify WAN interface to apply UPnP.
n=0, it means to auto-select WAN interface.
n=1, WAN1
n=2, WAN2 ……….
Example
> upnp wan 1
use wan1 now.
Telnet Command: usb list
This command is use to display the information about the brand name and model name of the
USB modems which are supported by Vigor router.
Example
> usb list ?
Brand
Module
Standard
------------------------
--------
Aiko
Aiko 83D
3.5G
Y
BandRich
Bandluxe C170
3.5G
Y
BandRich
Bandluxe C270
3.5G
Y
BandRich
Bandluxe C321
3.5G
Y
BandRich
Bandluxe C330
3.5G
Y
BandRich
Bandluxe C331
3.5G
Y
BandRich
Bandluxe C502
3.5G
Y
Huawei
Huawei E169u
3.5G
Y
Huawei
Huawei E220
3.5G
Y
Huawei
Huawei E303D
3.5G
Y
Huawei
Huawei E392
3.5G
Y
Huawei
Huawei E398
3.5G
Y
Sony Erics
Sony Ericsson MD30
3.5G
Y
Page 742 / 794
Vigor2860 Series User’s Guide
728
TP-LINK
TP-LINK MA180
3.5G
Y
TP-LINK
TP-LINK MA260
3.5G
Y
Vodafone
Vodafone K3765-Z
3.5G
Y
Vodafone
Vodafone K4605
3.5G
Y
ZTE
ZTE MF626
3.5G
Y
ZTE
ZTE MF627 plus
3.5G
Y
ZTE
ZTE MF633
3.5G
Y
ZTE
ZTE MF636
3.5G
Y
SpinCom
SpinCom GPRS Modem
3.5G
Y
- MORE - ['q': Quit, 'Enter': New Lines, 'Space Bar': Next Page] -
Telnet Command: vigbrg on
This command can make the router to be regarded as a modem but not a router.
Example
> vigbrg on
%Enable Vigor Bridge Function!
Telnet Command: vigbrg off
This command can disable vigor bridge function.
Example
> vigbrg off
%Disable Vigor Bridge Function!
Telnet Command: vigbrg status
This command can show whether the Vigor Bridge Function is enabled or disabled.
Example
> vigbrg status
%Vigor Bridge Function is enable!
%Wan1 management is disable!
Page 743 / 794
Vigor2860 Series User’s Guide
729
Telnet Command: vigbrg cfgip
This command allows users to transfer a bridge modem into ADSL router by accessing into
and adjusting specified IP address. Users can access into Web UI of the router to manage the
router through the IP address configured here.
vigbrg cfgip
[IP Address]
Syntax Description
Parameter
Description
IP Address
It means to type an IP address for users to manage the
router.
Example
> vigbrg cfgip ?
% Vigor Bridge Config IP,
Telnet Command: vigbrg wan1on
This command is used to enable the bridge WAN1 management.
Example
> vigbrg wan1on
%Enable Vigor Bridge Wan1 management!
Telnet Command: vigbrg wan1off
This command is used to disable the bridge WAN1 management.
Example
> vigbrg wan1off
%Disable Vigor Bridge Wan1 management!
Telnet Command: vpn l2lset
This command allows users to set advanced parameters for LAN to LAN function.
vpn l2lset
[list index]
peerid
[peerid]
vpn l2lset
[list index]
localid
[localid]
vpn l2lset
[list index]
main
[auto/proposal index]
vpn l2lset
[list index]
aggressive
[g1/g2]
vpn l2lset
[list index]
pfs
[on/off]
vpn l2lset
[list index]
phase
1[lifetime]
vpn l2lset
[list index]
phase2
[lifetime]
Page 744 / 794
Vigor2860 Series User’s Guide
730
Syntax Description
Parameter
Description
list index
It means the index number of L2L (LAN to LAN) profile.
peerid
It means the peer identity for aggressive mode.
localid
It means the local identity for aggressive mode.
main
It means to choose proposal for main mode.
auto index
It means to choose default proposals.
proposal index
It means to choose specified proposal.
aggressive
It means the chosen DH group for aggressive mode
pfs
It means “perfect forward secrete”.
on/off
It means to turn on or off the PFS function.
phase1
It means phase 1 of IKE.
lifetime
It means the lifetime value (in second) for phase 1 and
phase 2.
phase2
It means phase 2 of IKE.
Example
> VPN l2lset 1 peerid 10226
Telnet Command: vpn l2lDrop
This command allows users to terminate current LAN to LAN VPN connection.
Example
> vpn l2lDrop
>
Telnet Command: vpn dinset
This command allows users to configure setting for remote dial-in VPN profile.
vpn dinset
<list index>
vpn dinset
<list index> <on/off>
vpn dinset
<list index>
motp
<on/off>
vpn dinset
<list index>
pin_secret
<pin> <secret>
Syntax Description
Page 745 / 794
Vigor2860 Series User’s Guide
731
Parameter
Description
<list index>
It means the index number of the profile.
<on/off>
It means to enable or disable the profile.
on – Enable.
off – Disable.
motp <on/off>
It means to enable or disable the authentication with
mOTP function.
on – Enable.
off – Disable.
pin_secret<pin>
<secret>
It means to set PIN code with secret.
<pin>
-
Type the code for authentication (e.g, 1234).
<secret> -
Use the 32 digit-secret number generated by
mOTP in the mobile phone (e.g.,
e759bb6f0e94c7ab4fe6)
Example
> vpn dinset 1
Dial-in profile index 1
Profile Name: ???
Status: Deactive
Mobile OTP: Disabled
Password:
Idle Timeout: 300 sec
> vpn dinset 1 on
% set profile active
> vpn dinset 1 motp on
19216811.live