Page 766 / 794
Scroll up to view Page 761 - 765
Vigor2860 Series User’s Guide
752
Example
> wan detect status
WAN1: always on
WAN2: off
WAN3: off
WAN4: off
WAN5: off
> wan detect wan1 target 192.168.1.78
Set OK
> wan detect wan1 on
Set OK
> wan detect status
WAN1: on, Target=192.168.1.78, TTL=255
WAN2: off
WAN3: off
WAN4: off
WAN5: off
>
Telnet Command: wan lb
This command allows you to Enable/Disable for each WAN to join auto load balance member.
wan lb
[wan1/wan2/…] on
wan lb
[wan1/wan2/…] off
Syntax Description
Parameter
Description
wan1/wan2
It means to specify which WAN will be applied with load
balance.
on
It means to make WAN interface as the member of load
balance.
off
It means to cancel WAN interface as the member of load
balance.
Example
Page 767 / 794
Vigor2860 Series User’s Guide
753
> wan lb status
WAN1: on
WAN2: on
WAN3: on
WAN4: on
WAN5: on
WAN6: on
WAN7: on
Telnet Command: wan mvlan
This command allows you to configure multi-VLAN for WAN and LAN. It supports pure
bridge mode (modem mode) between Ethernet WAN and LAN port 2~4.
wan mvlan
[pvc_no/status/save/enable/disable] [on/off/clear/tag tag_no] [service type/vlan
priority] [px ... ][ Keep Tag]
Syntax Description
Parameter
Description
pvc_no
It means index number of PVC. There are 10 PVC,
0(Channel-1) to 9(Channel-9) allowed to be configured.
However, only 2 to 9 are available for configuration.
status
It means to display the whole Bridge status.
save
It means to save the configuration into flash of Vigor
router.
enable/disable
It means to enable/disable the Multi-VLAN function.
on/off
It means to turn on/off bridge mode for the specific
channel.
clear
It means to turn off/clear the port.
tag tag_no
It means to tag a number for the VLAN.
-1: No need to add tag number.
1-4095: Available setting numbers used as tagged
number.
service type
It means to specify the service type for VLAN.
0: Normal.
1: IGMP.
Page 768 / 794
Vigor2860 Series User’s Guide
754
vlan priority
It means to specify the priority for the VALN setting.
Range is from 0 to 7.
px
It means LAN port. Available setting number is from 2 to
4. Port number 1 is locked for NAT usage.
Keep Tag
It means Multi-VLAN packets will keep their VLAN
headers to LAN.
Example
PVC 7 will map to LAN port 2/3/4 in bridge mode; service type is Normal. No tag added.
> > wan mvlan 7 on p2 p3 p4
PVC
Bridge
p1 p2 p3 p4 p5 p6
Service Type
Tag
Priority
Keep Tag
------------------------------------------------------------------
7
ON
0
0
1
1
0
0
Normal
0(OFF)
0
OFF
>
Telnet Command: wan multifno
This command allows you to specify
a channel (in Multi-PVC/VLAN) to make bridge
connection to a specified WAN interface.
wan multifno
[channel #] [WAN interface #]
wan multifno
status
Syntax Description
Parameter
Description
channel #
There are 4 (?) channels including VLAN and PVC.
Available settings are:
1=Channel 1
3=Channel 3
4=Channel 4
5=Channel 5
WAN interface #
Type a number to indicate the WAN interface.
1=WAN1
status
It means to display current bridge status.
Example
> wan multifno 5 1
Page 769 / 794
Vigor2860 Series User’s Guide
755
% Configured channel 5 uplink to WAN1
> wan multifno status
% Channel 3 uplink ifno: 3
% Channel 4 uplink ifno: 3
% Channel 5 uplink ifno: 3
% Channel 6 uplink ifno: 3
% Channel 7 uplink ifno: 3
>
Page 770 / 794
Vigor2860 Series User’s Guide
756
Telnet Command: wl acl
This command allows the user to configure wireless access control settings.
wl acl enable
[ssid1 ssid2 ssid3 ssid4]
wl acl disable
[ssid1 ssid2 ssid3 ssid4]
wl acl add
[MAC] [ssid1 ssid2 ssid3 ssid4] [isolate]
wl acl del
[MAC]
wl acl mode
[ssid1 ssid2 ssid3 ssid4] [white/black]
wl acl show
wl acl showmode
wl acl clean
Syntax Description
Parameter
Description
enable [ssid1 ssid2
ssid3 ssid4]
It means to enable the settings for SSID1, SSID2,
SSID3 and SSID4.
disable [ssid1 ssid2
ssid3 ssid4]
It means to disable the settings for SSID1, SSID2,
SSID3 and SSID4.
add [MAC] [ssid1 ssid2
ssid3 ssid4] [isolate]
It means to associate a MAC address to certain SSID
interfaces' access control settings. The isolate setting
will limit the wireless client's network capabilities to
accessing the wireless LAN only.
[MAC] format: xx-xx-xx-xx-xx-xx
or xx:xx:xx:xx:xx:xx
or xx.xx.xx.xx.xx.xx
del [MAC]
It means to delete a MAC address entry defined in the
access control list.
mode [ssid1 ssid2 ssid3
ssid4] [white/black]
It means to set white/black list for each SSID.
wl acl show
It means to show access control status.
wl acl showmode
It means to show the mode for each SSID.
wl acl clean
It means to clean all access control setting.
Example
19216811.live