DrayTek Vigor2860Vn-plus Router Manual PDF (Setup & Configuration Guide)

Page 771 / 794 Scroll up to view Page 766 - 770

Vigor2860 Series User’s Guide

757

> > wl acl showmode

ssid1: none

ssid2: none

ssid3: none

ssid4: none

> wl acl add 00-50-70-ff-12-70

Set Done !!

> wl acl add 00-50-70-ff-12-70 ssid1 ssid2 isolate

Set Done !!

> wl acl show

----------Enable Mac Address Filter---------

ssid1: dis

ssid2: dis

ssid3: dis

ssid4: dis

----------MAC Address Filter----------

Index

Attribute

MAC Address

Associated SSIDs

0

00:50:70:ff:12:70

ssid1 ssid2 ssid3 ssid4

1

s

00:50:70:ff:12:70

ssid1 ssid2

s: Isolate the station from LAN

>

Telnet Command: wl config

This command allows users to configure general settings and security settings for wireless

connection.

wl config mode

[value]

wl config mode show

wl config channel

[number]

wl config preamble

[enable]

wl config txburst

[enable]

wl config ssid

[ssid_num enable ssid_name [hidden_ssid]]

wl config security

[SSID_NUMBER] [mode]

wl config ratectl

[ssid_num enable upload download ]

wl config isolate

[ssid_num lan member]

Syntax Description

Parameter

Description

mode[value]

It means to select connection mode for wireless

connection.

Page 772 / 794

Vigor2860 Series User’s Guide

758

Available settings are: "11bgn", "11gn", "11n", "11bg",

"11g", or "11b".

mode show

It means to display what the current wireless mode is.

channel [number]

It means the channel of frequency of the wireless LAN.

The available settings are 0,1,2,3,4,5,6,7,8,9,10,11,12

and 13.

number=0, means Auto

number=1, means Channel 1

….

number=13, means Channel 13.

preamble [enable]

It means to define the length of the sync field in an

802.11 packet.

Most modern wireless network uses short preamble with

56 bit sync field instead of long preamble with 128 bit

sync field. However, some original 11b wireless network

devices only support long preamble.

0: disable to use long preamble.

1: enable to use long preamble.

txburst [enable]

It means to enhance the performance in data

transmission about 40%* more (by enabling

Tx Burst

).

It is active only when both sides of Access Point and

Station (in wireless client) invoke this function at the

same time.

0: disable the function.

1: enable the funciton.

ssid[ssid_num enable

ssid_name

[hidden_ssid]]

It means to set the name of the SSID, hide the SSID if

required.

ssid_num:

Type 1, 2, 3 or 4 to specify SSID1, SSID2,

SSID3 or SSID4.

ssid_name

: Give a name for the specified SSID.

hidden_ssid

: Type 0 to hide the SSID or 1 to display the

SSID

Page 773 / 794

Vigor2860 Series User’s Guide

759

Security

[SSID_NUMBER]

[mode][key][index]

It means to configure security settings for the wirelesss

connection.

SSID_NUMBER

: Type 1, 2, 3 or 4 to specify SSID1,

SSID2, SSID3 or SSID4.

mode

: Available settings are:

disable:

No security.

wpa1x:

WPA/802.1x Only

wpa21x:

WPA2/802.1x Only

wpamix1x:

Mixed (WPA+WPA2/802.1x only)

wep1x:

WEP/802.1x Only

wpapsk:

WPA/PSK

wpa2psk:

WPA2/PSK

wpamixpsk:

Mixed (WPA+WPA2)/PSK

wep:

WEP

key, index

:

Moreover, you have to add keys for

wpapsk,

wpa2psk, wpamixpsk

and

wep

, and specify index

number of schedule profiles to be followed by the

wireless connection.

WEP keys must be in 5/13 ASCII text string or 10/26

Hexadecimal digit format; WPA keys must be in 8~63

ASCII text string or 64 Hexadecimal digit format.

ratectl [ssid_num

enable upload

download]

It means to set the rate control for the specified SSID.

ssid_num:

Choose 1, 2, 3 or 4 to specify SSID1, SSID2,

SSID3 or SSID4.

enable

: It means to enable the function of the rate

control for the specified SSID. 0: disable and 1:enable.

upload

: It means to configure the rate control for data

upload. The unit is kbps.

download

: It means to configure the rate control for data

download. The unit is kbps.

isolate [ssid_num lan

member]

It means to isolate the wireless connection for LAN

and/or Member.

Page 774 / 794

Vigor2860 Series User’s Guide

760

lan

– It can make the wireless clients (stations) with

remote-dial and LAN to LAN users not accessing for

each other.

member

– It can make the wireless clients (stations) with

the same SSID not accessing for each other.

Example

> wl config mode 11bgn

Current mode is 11bgn

% <Note> Please restart wireless after you set the channel

> wl config channel 13

Current channel is 13

% <Note> Please restart wireless after you set the channel.

> wl config preamble 1

Long preamble is enabled

% <Note> Please restart wireless after you set the parameters.

> wl config ssid 1 enable dray

SSID

Enable

Hide_SSID

Name

1

0

dray

% <Note> Please restart wireless after you set the parameters.

> wl config security 1 wpa1x

%% Configured Wlan Security Setting:

% SSID1

%%

Mode: wpa1x

%% Wireless card must be reset for configurations to take effect

%% (Telnet Command: wl restart)

Telnet Command: wl set

This command allows users to configure basic wireless settings.

wl set

[SSID]

[CHAN[En]]

wl set txburst

[enable]

Syntax Description

Parameter

Description

SSID

It means to type the SSID for the router. The maximum

character that you can use is 32.

Page 775 / 794

Vigor2860 Series User’s Guide

761

CHAN[En]

It means to specify required channel for the router.

CHAN:

The range for the number is between 1 ~ 13.

En

: type

on

to enable the function; type

off

to disable the

function.

txburst [enable]

It means to enhance the performance in data

transmission about 40%* more (by enabling

Tx Burst

).

It is active only when both sides of Access Point and

Station (in wireless client) invoke this function at the

same time.

0: disable the function.

1: enable the function.

Example

> wl set MKT 2 on

% New Wlan Setting is:

% SSID=MKT

% Chan=2

% Wl is Enable

Telnet Command: wl act

This command allows users to activate wireless settings.

wl act

[En]

Syntax Description

Parameter

Description

En

It means to enable or disable the function of VPN

isolation.

0: diable

1: enable

Example

> wl act on

% Set Wlan to Enable.

Telnet Command: wl scan

This command allows users to perform AP scanning.

Rate

Popular DrayTek Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share