Page 536 / 794
Scroll up to view Page 531 - 535
Vigor2860 Series User’s Guide
522
5.
Check
Allow management from the Internet
to set management access control and
click
OK.
6.
Open
WAN>>Internet Access.
Use the drop down list of
Access Mode
on WAN1
to
select
MPoA
(RFC1483/2684). Then, click
Details Page
.
7.
Click
Specify an IP address
. Type correct WAN IP address, subnet mask and gateway
IP address for your CPE. Then click
OK
.
Page 537 / 794
Vigor2860 Series User’s Guide
523
Note:
Reboot the CPE device and re-log into Vigor2860 series. CPE which has
registered to Vigor2860 series will be captured and displayed on the page of
Central
VPN Management>>CPE Management
.
4.14.3 Check CPE Maintenance Page
1.
Return to the web user interface of Vigor2860 series.
2.
Open
Central VPN Management>>VPN Management
. Now there is one CPE
displayed on the field of Unmanaged Devices List.
3.
Choose the one (Vigor2850) from Unmanaged Devices List and click
Add
. The
following dialog will be popped up. Type the name and the location of the router
respectively. Click
OK
to save the configuration.
4.
The selected CPE will be moved and displayed on Managed Devices List which means it
is controlled / managed by Vigor2860 series from now on.
Page 538 / 794
Vigor2860 Series User’s Guide
524
4.15 CVM Application - How to build the VPN between remote
devices and Vigor2860 series?
When a remote device is managed by Vigor2860 series, it is easy to build VPN between these
two devices.
1.
Access into the web user interface of Vigor2860 series.
2.
Open
Central VPN Management>>CPE Management
.
3.
Click the device icon (marked with
) and click the
PPTP/IPsec
button.
4.
Wait for a moment. If VPN is built successfully, related information will be displayed on
CPE VPN Connection List
.
Page 539 / 794
Vigor2860 Series User’s Guide
525
5.
A LAN to LAN profile for such VPN will be generated automatically. You can access
into
VPN and Remote Access>>LAN to LAN
of the remote device for viewing the
detailed information.
Note:
The profile name is created automatically by the system. Do not modify any value
in such page to avoid VPN error.
Page 540 / 794
Vigor2860 Series User’s Guide
526
4.16 CVM Application - How to upgrade CPE firmware through
Vigor2860 series?
Download the newest firmware from your Draytek website to USB Storage Disk for the
device (e.g., Vigor2850) managed by Vigor2860 series.
Vigor2850, as an example, is chosen for Vigor2860 to perform the CPE firmware upgrade
remotely in this case.
1.
Plug in USB storage disk onto Vigor2860 series via USB interface. Make sure the USB
disk has been installed correctly, otherwise, the firmware upgrade will not be successful.
2.
Access into web user interface of Vigor2860 series. Open Central
VPN
Management>>CPE Management
and click the
CPE Maintenance
tab.
3.
Click any index number link, e.g., Index 1.
19216811.live