Page 551 / 794
Scroll up to view Page 546 - 550
Vigor2860 Series User’s Guide
537
Also you will get a
Tracking Window
if you don’t block the pop-up window.
Don’t setup a user profile in
User Management
and a VPN Remote Dial-in user profile
with the same Username. Otherwise, you may get unexpected result. It is because the
VPN Remote Dial-in User profiles can be extended to the User profiles in User
Management for authentication.
There are two different behaviors when a User Management account and a VPN profile
share the same Username:
If
SSL Tunnel
or
SSL Web Proxy
is enabled in the VPN profile, the user profile
in User Management will always be invalid for Web authentication. For example,
if you create a user profile in User Management with
chaochen/test
as
username/password, while a VPN Remote Dial-in user profile with the same
username “chaochen
”
but a different password “1234”, you will always get error
message
The username or password you entered is incorrect
when you use
chaochen/test
via Web to do authentication.
Page 552 / 794
Vigor2860 Series User’s Guide
538
If
SSL Tunnel
or
SSL Web Proxy
is disabled in the VPN profile, a User
Management account and a remote dial-in VPN profile can use the same
Username, even with different passwords. However, we recommend you to use
different usernames for different user profiles in User Management and VPN
profiles.
Page 553 / 794
Vigor2860 Series User’s Guide
539
Authentication via Telnet
The LAN clients can also authenticate their accounts via telnet.
1.
Telnet to the router’s LAN IP address and input the account name for the authentication:
2.
Type the password for authentication and press
Enter
. The message
User login
successful
will be displayed with the expired time (if configured).
Note:
Here
expired time
is “Unlimited” means the
Time Quota
function is not
enabled for this account. After login, this account will not be expired until it is
logout.
3.
In the Web interface of router, the configuration page of
Time Quota
is shown as below.
Page 554 / 794
Vigor2860 Series User’s Guide
540
4.
If the Time Quota is set with “0” minute, you will get the following message which
means this account has no time quota.
If the
Time Quota
is enabled and time is not 0 minute,
You will get the following message. The expired time is shown after you login.
After you run out the available time, you can’t use this account any more until the
administrator manually adds additional time for you.
Page 555 / 794
Vigor2860 Series User’s Guide
541
Authentication via VigorPro Alert Notice Tool
Authentication via Web or Telnet is convenient for users; however, it has some limitations.
The most advantage with VigorPro Alert Notice Tool to operate the authentication is the
ability to do
auto login
. If the timeout value set on the router for the user account has been
reached, the router will stop the client computer from accessing the Internet until it does an
authentication again. Authentication via VigorPro Alert Notice Tool allows user to setup the
re-authentication interval so that the utility will send authentication requests periodically. This
will keep the client hosts from having to manually authenticate again and again.
The configuration of the VigorPro Alert Notice Tool is as follows:
1.
Click
Authenticate Now!!
to start the authentication immediately.
2.
You may get the
VigorPro Alert Notice Tool
from the following link:
Note:
Any modification to the Firewall policy will break down the connections of all
current users. They all have to authenticate again for Internet access.
The administrator may check the current users from
User Online Status
page.
19216811.live