Page 26 / 44
Scroll up to view Page 21 - 25
Vigor 2820 Series Quick Start Guide
20
6.
In the following dialog, type
192.168.1.1
(router’s LAN IP) in the field of
Printer
Name or IP Address
and type
IP_192.168.1.1
as the port name. Then, click
Next
.
7.
Click Standard and choose Generic Network Card.
8.
Then, in the following dialog, click
Finish
.
Page 27 / 44
Vigor 2820 Series Quick Start Guide
21
9.
Now, your system will ask you to choose right name of the printer that you installed
onto the router. Such step can make correct driver loaded onto your PC. When you
finish the selection, click
Next
.
10.
For the final stage, you need to go back to
Control Panel-> Printers
and edit the
property of the new printer you have added.
11.
Select "
LPR
" on Protocol, type
p1
(number 1) as Queue Name. Then click
OK
.
Next please refer to the red rectangle for choosing the correct protocol and UPR
name.
Page 28 / 44
Vigor 2820 Series Quick Start Guide
22
The printer can be used for printing now. Most of the printers with different
manufacturers are compatible with vigor router.
Note 1:
Some printers with the fax/scanning or other additional functions are not
supported. If you do not know whether your printer is supported or not, please visit
www.draytek.com to find out the printer list. Open
Support >FAQ
; find out the link
of
Printer Server
and click it; then click the
What types of printers are
compatible with Vigor router?
link.
Note 2:
Vigor router supports printing request from computers via LAN ports but not
WAN port.
Page 29 / 44
Vigor 2820 Series Quick Start Guide
23
3. Configuring Web Pages
To access Internet, please finish basic configuration after completing the hardware
installation.
3.1 Basic Configuration
The
Quick Start Wizard
is designed for you to easily set up your router for Internet
access. You can directly access the
Quick Start Wizard
via Web Configurator.
1.
Make sure your PC connects to the router correctly.
Notice:
You may either simply set up your computer to get IP dynamically
from the router or set up the IP address of the computer to be the same
subnet as
. For the
detailed information, please refer to the later section - Trouble Shooting of
the guide.
2.
Open a web browser on your PC and type
A pop-up window will
open to ask for username and password. Please type “admin” as the username and
leave blank for the password on the window. Next click
OK
for next screen.
Notice:
If you fail to access to the web configuration, please go to “Trouble
Shooting” for detecting and solving your problem.
3.
Now, the
Main Screen
will pop up. Click
Quick Start Wizard
.
Page 30 / 44
Vigor 2820 Series Quick Start Guide
24
Note:
The home page will change slightly in accordance with the router you have.
4.
Enter the login password on the field of
New Password
and retype it on the field of
Retype New Password
. Then click
Next
to continue.
5.
On the next page as shown below, please select the WAN interface (WAN 1 or
WAN2) that you use. If DSL interface is used, please choose WAN1; if WAN2
interface is used, please choose WAN2. Choose
Auto negotiation
as the physical
type for your router. Then click
Next
for next step.
19216811.live