1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor-2820n
    5. /
  5. 3
Page 11 / 44 Scroll up to view Page 6 - 10
Vigor 2820 Series Quick Start Guide
5
Interface
Description
Wireless LAN
ON/OFF/WPS
Press "Wireless LAN ON/OFF/WPS" button for 2 seconds to wait for client device
making network connection through WPS.
Press "Wireless LAN ON/OFF/WPS" button once to enable (WLAN LED on) or
disable (WLAN LED off) wireless connection.
Factory Reset
Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press
the hole and keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will restart with the
factory default configuration.
LAN (1-4)
Connecters for local networked devices.
DSL
Connecter for accessing the Internet through ADSL2/2+.
WAN 2
Connecter for remote networked devices.
USB
Connecter for a USB device (for 3G USB Modem or printer).
PWR
Connecter for a power adapter.
ON/OFF
Power Switch.
Page 12 / 44
Vigor 2820 Series Quick Start Guide
6
1.1.3 For Vigor2820V
LED
Status
Explanation
Blinking
The router is powered on and running normally.
ACT (Activity)
Off
The router is powered off.
On
A USB device is connected and active.
USB
Blinking
The data is transmitting.
CSM
On
The profile of CSM (Content Security Management) for
IM/P2P application is enabled from
Firewall >>
General Setup
. (Such profile is established under
CSM
menu).
WCF
On
The Web Content Filter is active. (It is enabled from
Firewall >> General Setup
and the web content filter
profile is established under
CSM
menu.)
On
The router is ready to access Internet through DSL link.
DSL
Blinking
Slowly: The modem is ready.
Quickly: The connection is training.
On
The router is ready to access Internet through WAN
connection.
WAN2
Blinking
It will blink while transmitting data.
On
A PSTN phone call comes (in and out). However, when
the phone call is disconnected, the LED will be off
about six seconds later.
Line
Off
There is no PSTN phone call.
On
The phone connected to this port is off-hook.
Phone 1/2
Off
The phone connected to this port is on-hook.
LED on Connector
On
The port is connected.
Off
The port is disconnected.
Left LED
(Green)
Blinking
The data is transmitting.
On
The port is connected with 1000Mbps.
LAN 1(Giga)
Right LED
(Green)
Off
The port is connected with 10/100Mbps.
On
The port is connected.
Off
The port is disconnected.
Left LED
(Green)
Blinking
The data is transmitting.
On
The port is connected with 100Mbps.
LAN 2/3/4
Right LED
(Green)
Off
The port is connected with 10Mbps.
On
The port is connected.
Off
The port is disconnected.
Left LED
(Green)
Blinking
The data is transmitting.
On
The port is connected with 100Mbps.
WAN 2
Right LED
(Green)
Off
The port is connected with 10Mbps.
Page 13 / 44
Vigor 2820 Series Quick Start Guide
7
Interface
Description
Factory Reset
Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press
the hole and keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will restart with the
factory default configuration.
LAN (1-4)
Connecters for local networked devices.
DSL
Connecter for accessing the Internet through ADSL2/2+.
WAN 2
Connecter for remote networked devices.
USB
Connecter for a USB device (for 3G USB Modem or printer).
PWR
Connecter for a power adapter.
ON/OFF
Power Switch.
Page 14 / 44
Vigor 2820 Series Quick Start Guide
8
1.1.4 For Vigor2820Vn
LED
Status
Explanation
Blinking
The router is powered on and running normally.
ACT (Activity)
Off
The router is powered off.
On
A USB device is connected and active.
USB
Blinking
The data is transmitting.
CSM
On
The profile of CSM (Content Security Management) for
IM/P2P application is enabled from
Firewall >>
General Setup
. (Such profile is established under
CSM
menu).
On
Wireless access point is ready.
WLAN
Blinking
It will blink while wireless traffic goes through.
If ACT and WLAN LEDs blink simultaneously when
WPS is working, and it will return to normal condition
after two minutes. (You need to setup WPS within 2
minutes.)
On
The router is ready to access Internet through DSL link.
DSL
Blinking
Slowly: The modem is ready.
Quickly: The connection is training.
On
The router is ready to access Internet through WAN
connection.
WAN2
Blinking
It will blink while transmitting data.
On
A PSTN phone call comes (in and out). However, when
the phone call is disconnected, the LED will be off
about six seconds later.
Line
Off
There is no PSTN phone call.
On
The phone connected to this port is off-hook.
Off
The phone connected to this port is on-hook.
Phone 1/2
Blinking
A phone call comes.
LED on Connector
On
The port is connected.
Off
The port is disconnected.
Left LED
(Green)
Blinking
The data is transmitting.
On
The port is connected with 1000Mbps.
LAN 1(Giga)
Right LED
(Green)
Off
The port is connected with 10/100Mbps.
On
The port is connected.
Off
The port is disconnected.
Left LED
(Green)
Blinking
The data is transmitting.
On
The port is connected with 100Mbps.
LAN 2/3/4
Right LED
(Green)
Off
The port is connected with 10Mbps.
On
The port is connected.
Off
The port is disconnected.
Left LED
(Green)
Blinking
The data is transmitting.
On
The port is connected with 100Mbps.
WAN 2
Right LED
(Green)
Off
The port is connected with 10Mbps.
Page 15 / 44
Vigor 2820 Series Quick Start Guide
9
Interface
Description
Wireless LAN
ON/OFF/WPS
Press "Wireless LAN ON/OFF/WPS" button for 2 seconds to wait for client device
making network connection through WPS.
Press "Wireless LAN ON/OFF/WPS" button once to enable (WLAN LED on) or
disable (WLAN LED off) wireless connection.
Factory Reset
Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press
the hole and keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will restart with the
factory default configuration.
Phone 1/2
Connecter for PSTN phone.
Line
Connector for PSTN life line.
LAN (1-4)
Connecters for local networked devices.
DSL
Connecter for accessing the Internet through ADSL2/2+.
WAN 2
Connecter for remote networked devices.
USB
Connecter for a USB device (for 3G USB Modem or printer).
PWR
Connecter for a power adapter.
ON/OFF
Power Switch.

Rate

3.5 / 5 based on 2 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top