Page 156 / 202
Scroll up to view Page 151 - 155
Vigor2800 Series User’s Guide
150
Set Community
Set community by typing a proper name. The default
setting is
private.
Manager Host IP
Set one host as the manager to execute SNMP function.
Please type in IP address to specify certain host.
Trap Community
Set trap community by typing a proper name. The default
setting is
public.
Notification Host IP
Set the IP address of the host that will receive the trap
community.
Trap Timeout
The default setting is 10 seconds.
3.13.7 Reboot System
The Web Configurator may be used to restart your router. Click
Reboot System
from
System Maintenance
to open the following page.
If you want to reboot the router using the current configuration, check
Using current
configuration
and click
OK
. To reset the router settings to default values, check
Using
factory default configuration
and click
OK
. The router will take 5 seconds to reboot the
system.
Page 157 / 202
Vigor2800 Series User’s Guide
151
3.13.8 Firmware Upgrade
Before upgrading your router firmware, you need to install the Router Tools. The
Firmware
Upgrade Utility
is included in the tools. The following web page will guide you to upgrade
firmware by using an example. Note that this example is running over Windows OS
(Operating System).
Download the newest firmware from DrayTek's web site or FTP site. The DrayTek web site
is www.draytek.com (or local DrayTek's web site) and FTP site is ftp.draytek.com.
Click
System Maintenance>> Firmware Upgrade
to launch the Firmware Upgrade Utility.
Click
OK
. The following screen will appear. Please execute the firmware upgrade utility
first.
For the detailed information about firmware update, please go to Chapter 4.
Page 158 / 202
Vigor2800 Series User’s Guide
152
3.14 Diagnostics
Diagnostic Tools provide a useful way to
view
or
diagnose
the status of your Vigor router.
Below shows the menu items for Diagnostics.
3.14.1 WAN Connection
Click
Diagnostics
and click
WAN Connection
to open the web page.
Refresh
To obtain the latest information, click here to reload the
WAN connection status.
Broadband Access Mode/Status
Display the broadband access mode and status. If the
broadband connection is active, it will show Internet
access mode is enabled. If the connection is idle, it
will show “
---
”.
WAN IP Address
The WAN IP address for the active connection.
Dial PPPoE or PPPoA
Click it to force the router to establish a PPPoE or PPPoA
connection.
Page 159 / 202
Vigor2800 Series User’s Guide
153
3.14.2 Dial-out Trigger
Click
Diagnostics
and click
Dial-out Trigger
to open the web page. The internet connection
(e.g., ISDN, PPPoE, PPPoA, etc) is triggered by a package sending from the source IP
address.
Decoded Format
It shows the source IP address (local), destination IP
(remote) address, the protocol and length of the package.
Refresh
Click it to reload the page.
3.14.3 Routing Table
Click
Diagnostics
and click
Routing Table
to open the web page.
Refresh
Click it to reload the page.
Page 160 / 202
Vigor2800 Series User’s Guide
154
3.14.4 ARP Cache Table
Click
Diagnostics
and click
ARP Cache Table
to view the content of the ARP (Address
Resolution Protocol) cache held in the router. The table shows a mapping between an
Ethernet hardware address (MAC Address) and an IP address.
Refresh
Click it to reload the page.
Clear
Click it to clear the whole table.
3.14.5 DHCP Table
The facility provides information on IP address assignments. This information is helpful in
diagnosing network problems, such as IP address conflicts, etc.
Click
Diagnostics
and click
DHCP Table
to open the web page.
Index
It displays the connection item number.
IP Address
It displays the IP address assigned by this router for
specified PC.
MAC Address
It displays the MAC address for the specified PC that
DHCP assigned IP address for it.
Leased Time
It displays the leased time of the specified PC.
HOST ID
It displays the host ID name of the specified PC.
Refresh
Click it to reload the page.
19216811.live