1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor-2800G
    5. /
  5. 30
Page 146 / 202 Scroll up to view Page 141 - 145
Vigor2800 Series User’s Guide
140
The
VLAN >> VALN
Cross Setup
allows you to set a communication bridge between
computers in Wireless VLAN and wired VLAN. To achieve the intention of the above
illustration, simply check the box under VLAN0 on the line of W_VLAN0.
Enable
Check this box to invoke VLAN Cross Setup function.
VLAN0-3
It represents the groups of virtual LAN connected by Ethernet
interface.
W_VLAN0-15
It represents the groups of wireless VLAN communicated by
wireless interface.
Page 147 / 202
Vigor2800 Series User’s Guide
141
3.12.4 Wired Rate Control
Rate Control
manages the transmission rate of data in and out through the router. You can
also manage the in/out rate of each Ethernet port. Go to
VLAN
menu and select
Wired Rate
Control
. The following page will appear. Click
Enable
to invoke VLAN function.
For the rate control of wired connection, please open VLAN menu and choose
Wired Rate
Control
. The following page will be shown for you to adjust.
Enable
Check this box to enable this function (for Rate Control).
The
rate control will limit the transmission rate for data in and out.
Check the corresponding boxes to enable the rate control
function for different ports.
Out
It decides the rate of data transmission for output. When you
check the box of
Enable
, please also decide the rate by using
the drop down list of
Rate
.
In
It decides the rate of data transmission for input. When you
check the box of
Enable
, please also decide the rate by using
the drop down list of
Rate
.
Page 148 / 202
Vigor2800 Series User’s Guide
142
3.12.5 Wireless Rate Control
Rate Control
manages the transmission rate of data in and out through the router. You can
also manage the in/out rate of each wireless VLAN. Go to
VLAN
menu and select
Wireless
Rate Control
. The following page will appear. Click
Enable
to invoke VLAN function.
For the rate control of wireless connection, please open VLAN menu and choose
Wireless
Rate Control
. The following page will be shown for you to adjust.
Enable
Check this box to enable this function (for Rate Control).
The
rate control will limit the transmission rate for upload and
download.
Upload Rate
It decides the rate of data transmission for output. The default
setting is 300. The range must be between 100 kbps to
20,000kbps. Adjust the values according to your necessity.
Download Rate
It decides the rate of data transmission for input. The default
setting is 300. The range must be between 100 kbps to
20,000kbps. Adjust the values according to your necessity.
Page 149 / 202
Vigor2800 Series User’s Guide
143
3.13 System Maintenance
For the system setup, there are several items that you have to know the way of configuration:
Status, Administrator Password, Configuration Backup, Syslog, Time setup, Reboot System,
Firmware Upgrade.
Below shows the menu items for System Maintenance.
3.13.1 System Status
The
System Status
provides basic network settings of Vigor router. It includes LAN and
WAN interface information. Also, you could get the current running firmware version or
firmware related information from this presentation.
Model Name
Display the model name of the router.
Firmware Version
Display the firmware version of the router.
Build Date/Time
Display the date and time of the current firmware build.
MAC Address
Display the MAC address of the LAN Interface.
1
st
IP Address
Display the IP address of the LAN interface.
1
st
Subnet Mask
Display the subnet mask address of the LAN interface.
DHCP Server
Display the current status of DHCP server of the LAN
interface.
Page 150 / 202
Vigor2800 Series User’s Guide
144
MAC Address
Display the MAC address of the WAN Interface.
IP Address
Display the IP address of the WAN interface.
Default Gateway
Display the assigned IP address of the default gateway.
DNS
Display the assigned IP address of the primary DNS.
Port
Display the available VoIP ports.
SIP registrar
Display the
registered SIP Server.
Account ID
Display the default account name.
Register
Display the result of the registration.
Codec
Display the used Codec.
In Calls
Display the number of in calls.
Out Calls
Display the number of out calls.
MAC Address
Display the MAC address of the wireless LAN.
Frequency Domain
It can be Europe (13 usable channels), USA (11 usable
channels) etc. The available channels supported by the
wireless products in different countries are various.
Firmware Version
It indicates information about equipped WLAN miniPCi
card. This also helps to provide availability of some
features that are bound with some WLAN miniPCi card.
3.13.2 Administrator Password
This page allows you to set new password.
Old Password
Type in the old password. The factory default setting for
password is blank.
New Password
Type in new password in this filed.
Retype New Password
Type in the new password again.
When you click OK, the login window will appear. Please use the new password to access
into the web configurator again.
3.12.3 Configuration Backup
Backup the Configuration
Follow the steps below to backup your configuration.
1.
Go to
System Maintenance
>>
Configuration Backup
. The following windows will
be popped-up, as shown below.

Rate

4.7 / 5 based on 3 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top