1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor-2800G
    5. /
  5. 31
Page 151 / 202 Scroll up to view Page 146 - 150
Vigor2800 Series User’s Guide
145
2.
Click
Backup
button to get into the following dialog. Click
Save
button to open
another dialog for saving configuration as a file.
3.
In
Save As
dialog, the default filename is
config.cfg
. You could give it another name
by yourself.
4.
Click
Save
button, the configuration will download automatically to your computer as a
file named
config.cfg
.
The above example is using
Windows
platform for demonstrating examples. The
Mac
or
Linux
platform will appear different windows, but the backup function is still available.
Page 152 / 202
Vigor2800 Series User’s Guide
146
Restore Configuration
1.
Go to
System Maintenance
>>
Configuration Backup
. The following windows will
be popped-up, as shown below.
2.
Click
Browse
button to choose the correct configuration file for uploading to the
router.
3.
Click
Restore
button and wait for few seconds, the following picture will tell you that
the restoration procedure is successful.
3.13.4 Syslog/Mail Alert
SysLog function is provided to help users to monitor router. There is no bother to directly get
into the Web Configurator of the router or borrow debug equipments.
Enable
Check “
Enable
” to activate this function.
Syslog Server IP
The IP address of the Syslog server.
Destination Port
Assign a port for the Syslog protocol.
Enable syslog message
Check the requried item for viewing its log on syslg
message.
SMTP Server
The IP address of the SMTP server.
Mail To
Assign a mail address for sending mails out.
Return-Path
Assign a path for receiving the mail from outside.
Page 153 / 202
Vigor2800 Series User’s Guide
147
Authentication
Check this box to activate this function. Some servers
might need user name and password for authentication.
Therefore, activate this mechanism is required.
User Name
Type the user name for the authentication.
Password
Type the password for the authentication.
Click
OK
to save these settings.
For viewing the Syslog, please do the following:
1.
Just set your monitor PC’s IP address in the field of Server IP Address
2.
Install the Router Tools in the
Utility
within provided CD. After installation, click on
the
Router Tools>>Syslog
from program menu.
3.
From the Syslog screen, select the router you want to monitor. Be reminded that in
Network Information
, select the network adapter used to connect to the router.
Otherwise, you won’t succeed in retrieving information from the router.
Page 154 / 202
Vigor2800 Series User’s Guide
148
3.13.5 Time and Date
It allows you to specify where the time of the router should be inquired from.
Current System Time
Click
Inquire Time
to get the current time.
Use Browser Time
Select this option to use the browser time from the
remote administrator PC host as router’s system time.
Use Internet Time
Select to inquire time information from Time Server on
the Internet using assigned protocol.
Time Protocol
Select a time protocol.
Server IP Address
Type the IP address of the time server.
Time Zone
Select the time zone where the router is located.
Enable Daylight Saving
Check this box to invoke daylight saving function.
Automatically Update Interval
Select a time interval for updating from the NTP server.
Click
OK
to save these settings.
Page 155 / 202
Vigor2800 Series User’s Guide
149
3.13.6 Management
This page allows you to manage the settings for access control, access list, port setup, and
SMP setup. For example, as to management access control, the port number is used to
send/receive SIP message for building a session. The default value is 5060 and this must
match with the peer Registrar when making VoIP calls.
Enable remote firmware
upgrade
Chick the checkbox to allow remote firmware upgrade through
FTP (File Transfer Protocol).
Allow management from the
Internet
Enable the checkbox to allow system administrators to login
from the Internet. By default, it is not allowed.
Disable PING from the Internet
Check the checkbox to reject all PING packets from the
Internet. For security issue, this function is enabled by default.
Access List
You could specify that the system administrator can only
login from a specific host or network defined in the list.
A maximum of three IPs/subnet masks is allowed.
List IP
- Indicate an IP address allowed to login to the
router.
Subnet Mask -
Represent a subnet mask allowed to login
to the router.
Default Ports
Check to use standard port numbers for the Telnet and
HTTP servers.
User Defined Ports
Check to specify user-defined port numbers for the
Telnet and HTTP servers.
Enable SNMP Agent
Check it to enable this function.
Get Community
Set the name for getting community by typing a proper
character. The default setting is
public.

Rate

4.7 / 5 based on 3 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top