1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor-2710
    5. /
  5. 22
Page 106 / 335 Scroll up to view Page 101 - 105
Vigor2710 Series User’s Guide
94
Connected
” will be shown here. Once the USB disk has
been found, the connection status will display “
Disk
Connected
”.
Disconnect USB Disk
– click this button to disconnect the
USB disk with the router.
Write Protect Status
If the USB cannot be written with any files, this field will
display YES.
Disk Capacity
It displays the total capacity of the USB disk.
Free Capacity
It displays the free space of the USB disk. Click
Refresh
at
any time to get new status for free capacity.
Service
It displays the service that such USB disk will serve.
IP Address
It displays the IP address of the user’s host which connecting
to the FTP server.
Username
It displays the username that user uses to login to the FTP
server.
When you insert USB disk into the Vigor router, the system will start to find out such device
within several seconds.
3.8 System Maintenance
For the system setup, there are several items that you have to know the way of configuration:
Status, Administrator Password, Configuration Backup, Syslog, Time setup, Reboot System,
Firmware Upgrade.
Below shows the menu items for System Maintenance.
3.8.1 System Status
The
System Status
provides basic network settings of Vigor router (web page will change
according to the route you have). It includes LAN and WAN interface information. Also,
you could get the current running firmware version or firmware related information from this
presentation.
Page 107 / 335
Vigor2710 Series User’s Guide
95
Model Name
Display the model name of the router.
Firmware Version
Display the firmware version of the router.
Build Date/Time
Display the date and time of the current firmware build.
ADSL Firmware Version
Display the ADSL firmware version.
LAN-------
MAC Address
Display the MAC address of the LAN Interface.
1
st
IP Address
Display the IP address of the LAN interface.
1
st
Subnet Mask
Display the subnet mask address of the LAN interface.
DHCP Server
Display the current status of DHCP server of the LAN
interface.
DNS
Display the assigned IP address of the primary DNS.
WAN-------
Link Status
Display current connection status.
MAC Address
Display the MAC address of the WAN Interface.
Connection
Display the connection type.
IP Address
Display the IP address of the WAN interface.
Default Gateway
Display the assigned IP address of the default gateway.
Wireless LAN-------
MAC Address
Display the MAC address of the wireless LAN.
Frequency Domain
It can be Europe (13 usable channels), USA (11 usable
channels) etc. The available channels supported by the
wireless products in different countries are various.
Firmware Version
It indicates information about equipped WLAN miniPCi
card. This also helps to provide availability of some features
that are bound with some WLAN miniPCi.
SSID
Display the SSID of the router.
Page 108 / 335
Vigor2710 Series User’s Guide
96
3.8.2 User Password
This page allows you to set new password for user operation.
Old Password
Type in the old password. The factory default setting for
password is blank.
New Password
Type in new password in this field.
Confirm Password
Type in the new password again.
When you click
OK
, the login window will appear. Please use the new password to access
into the web configurator again.
3.8.3 Time and Date
It allows you to specify where the time of the router should be inquired from.
Current System Time
Click
Inquire Time
to get the current time.
Use Browser Time
Select this option to use the browser time from the remote
administrator PC host as router’s system time.
Use Internet Time
Select to inquire time information from Time Server on the
Internet using assigned protocol.
Server IP Address
Type the IP address of the time server.
Time Zone
Select the time zone where the router is located.
Enable Daylight Saving
Check the box to enable the daylight saving. Such feature is
available for certain area.
Automatically Update
Select a time interval for updating from the NTP server.
Page 109 / 335
Vigor2710 Series User’s Guide
97
Interval
Click
OK
to save these settings.
3.8.4 Reboot System
The Web Configurator may be used to restart your router for using current configuration.
Click
Reboot System
from
System Maintenance
to open the following page.
Click
OK
. The router will take several seconds to reboot the system.
Note:
When the system pops up Reboot System web page after you configure web
settings, please click
OK
to reboot your router for ensuring normal operation and
preventing unexpected errors of the router in the future.
3.9 Diagnostics
Diagnostic Tools provide a useful way to
view
or
diagnose
the status of your Vigor router.
Below shows the menu items for Diagnostics.
3.9.1 DHCP Table
The facility provides information on IP address assignments. This information is helpful in
diagnosing network problems, such as IP address conflicts, etc.
Click
Diagnostics
and click
DHCP Table
to open the web page.
Page 110 / 335
Vigor2710 Series User’s Guide
98
Index
It displays the connection item number.
IP Address
It displays the IP address assigned by this router for specified
PC.
MAC Address
It displays the MAC address for the specified PC that DHCP
assigned IP address for it.
Leased Time
It displays the leased time of the specified PC.
HOST ID
It displays the host ID name of the specified PC.
Refresh
Click it to reload the page.
3.9.2 Ping Diagnosis
Click
Diagnostics
and click
Ping Diagnosis
to pen the web page.
Ping to
Use the drop down list to choose the destination that you want
to ping.
IP Address
Type in the IP address of the Host/IP that you want to ping.
Run
Click this button to start the ping work. The result will be
displayed on the screen.
Clear
Click this link to remove the result on the window.

Rate

4 / 5 based on 1 vote.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top