1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor-2710
    5. /
  5. 23
Page 111 / 335 Scroll up to view Page 106 - 110
Vigor2710 Series User’s Guide
99
3.9.3 Trace Route
Click
Diagnostics
and click
Trace Route
to
open the web page. This page allows you to
trace the routes from router to the host. Simply type the IP address of the host in the box and
click
Run
. The result of route trace will be shown on the screen.
Protocol
Use the drop down list to choose the protocol that you want to
ping through.
Host/IP Address
It indicates the IP address of the host.
Run
Click this button to start route tracing work.
Clear
Click this link to remove the result on the window.
3.10 Product Registration
When you click it, you will be guided to visit myvigor.draytek.com and open the
corresponding pages directly.
Page 112 / 335
Vigor2710 Series User’s Guide
100
This page is left blank.
Page 113 / 335
Vigor2710 Series User’s Guide
101
4
A
A
d
d
m
m
i
i
n
n
M
M
o
o
d
d
e
e
O
O
p
p
e
e
r
r
a
a
t
t
i
i
o
o
n
n
This chapter will guide users to execute advanced (full) configuration through admin mode
operation. As for other examples of application, please refer to chapter 5.
1.
Open a web browser on your PC and type
The window will ask for
typing username and password.
2.
Please type “admin/admin” on Username/Password for administration operation.
Now, the
Main Screen
will appear. Be aware that “Admin mode” will be displayed on the
bottom left side.
4.1 Internet Access
Quick Start Wizard
offers user an easy method to quick setup the connection mode for the
router. Moreover, if you want to adjust more settings for different WAN modes, please go to
WAN
group and click the
Internet Access
link.
4.1.1 Basics of Internet Protocol (IP) Network
IP means Internet Protocol. Every device in an IP-based Network including routers, print
server, and host PCs, needs an IP address to identify its location on the network. To avoid
address conflicts, IP addresses are publicly registered with the Network Information Centre
(NIC). Having a unique IP address is mandatory for those devices participated in the public
network but not in the private TCP/IP local area networks (LANs), such as host PCs under
the management of a router since they do not need to be accessed by the public. Hence, the
NIC has reserved certain addresses that will never be registered publicly. These are known as
private
IP addresses, and are listed in the following ranges:
Page 114 / 335
Vigor2710 Series User’s Guide
102
From 10.0.0.0 to 10.255.255.255
From 172.16.0.0 to 172.31.255.255
From 192.168.0.0 to 192.168.255.255
What are Public IP Address and Private IP Address
As the router plays a role to manage and further protect its LAN, it interconnects groups of
host PCs. Each of them has a private IP address assigned by the built-in DHCP server of the
Vigor router. The router itself will also use the default
private IP
address: 192.168.1.1 to
communicate with the local hosts. Meanwhile, Vigor router will communicate with other
network devices through a
public IP
address. When the data flow passing through, the
Network Address Translation (NAT) function of the router will dedicate to translate
public/private addresses, and the packets will be delivered to the correct host PC in the local
area network. Thus, all the host PCs can share a common Internet connection.
Get Your Public IP Address from ISP
In ADSL deployment, the PPP (Point to Point)-style authentication and authorization is
required for bridging customer premises equipment (CPE). Point to Point Protocol over
Ethernet (PPPoE) connects a network of hosts via an access device to a remote access
concentrator or aggregation concentrator. This implementation provides users with
significant ease of use. Meanwhile it provides access control, billing, and type of service
according to user requirement.
When a router begins to connect to your ISP, a serial of discovery process will occur to ask
for a connection. Then a session will be created. Your user ID and password is authenticated
via
PAP
or
CHAP
with
RADIUS
authentication system. And your IP address, DNS server,
and other related information will usually be assigned by your ISP.
Below shows the menu items for Internet Access.
4.1.2 PPPoE/PPPoA
PPPoA, included in RFC1483, can be operated in either Logical Link Control-Subnetwork
Access Protocol or VC-Mux mode. As a CPE device, Vigor router encapsulates the PPP
session based for transport across the ADSL loop and your ISP’s Digital Subscriber Line
Access Multiplexer (SDLAM).
To choose PPPoE or PPPoA as the accessing protocol of the internet, please select
PPPoE/PPPoA
from the
Internet Access
menu. The following web page will be shown.
Page 115 / 335
Vigor2710 Series User’s Guide
103
Enable/Disable
Click
Enable
for activating this function. If you click
Disable
,
this function will be closed and all the settings that you adjusted
in this page will be invalid.
DSL Modem Settings
Set up the DSL parameters required by your ISP. These are vital
for building DSL connection to your ISP.
Multi-PVC channel
- The selections displayed here are
determined by the page of
Internet Access
–
Multi PVCs
.
Select
M-PVCs Channel
means no selection will be chosen.
VPI
- Type in the value provided by ISP.
VCI
- Type in the value provided by ISP.
Encapsulating Type
- Drop down the list to choose the type
provided by ISP.
Protocol
- Drop down the list to choose the one provided by ISP.
If you have already used
Quick Start Wizard
to set the protocol,
then it is not necessary for you to change any settings in this
group.
Modulation
– Drop down the list to choose a proper modulation

Rate

4 / 5 based on 1 vote.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top