1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor-2710
    5. /
  5. 24
Page 116 / 335 Scroll up to view Page 111 - 115
Vigor2710 Series User’s Guide
104
for the router.
PPPoE Pass-through
The router offers PPPoE dial-up connection. Besides, you also
can establish the PPPoE connection directly from local clients to
your ISP via the Vigor router. When PPPoA protocol is selected,
the PPPoE package transmitted by PC will be transformed into
PPPoA package and sent to WAN server. Thus, the PC can access
Internet through such direction.
For Wired LAN
– If you check this box, PCs on the same
network can use another set of PPPoE session (different with the
Host PC) to access into Internet.
For Wireless LAN
– If you check this box, PCs on the same
wireless network can use another set of PPPoE session (different
with the Host PC) to access into Internet.
VLAN Enable
- Enable the function of VLAN with tag. The
router will add specific VLAN number to all packets while
sending them out. Please type the tag value and specify the
priority for the packets sending by the router.
VID
– Type the value as the VLAN ID number. The range is form
0 to 4095.
Priority
– Type the packet priority number for such VLAN. The
range is from 0 to 7.
WAN Connection
Detection
Such function allows you to verify whether network connection is
alive or not through ARP Detect or Ping Detect.
Mode
– Choose
ARP Detect
or
Ping Detect
for the system to
execute for WAN detection.
Ping IP
– If you choose Ping Detect as detection mode, you have
to type IP address in this field for pinging.
TTL (Time to Live)
– Displays value for your reference. TTL
value is set by telnet command.
WAN Backup Setup
3G USB Modem –
If you have installed a 3G USB modem on the
router, please
enable
Dial Backup Mode
to perform file backup
via USB device. After choosing
Enable
, please click the
3G USB
Modem
link to access into the following page for configuring
detailed settings.
Page 117 / 335
Vigor2710 Series User’s Guide
105
PPP Client Mode -
Click
Enable
to activate this mode for
WAN2.
SIM PIN code
- Type PIN code of the SIM card that will be used
to access Internet.
Modem Initial String
- Such value is used to initialize USB
modem. Please use the default value. If you have any question,
please contact to your ISP.
APN Name
– APN (Access Point Name) is provided by your ISP
for identifying different access points. Simply click
Apply
to
apply such name. Finally, you have to click
OK
to save the
setting.
Apply
– Activate the function of identification.
Modem Initial String2 -
The initial string 1 is shared with APN.
In some cases, users may need another initial
AT
command to
restrict 3G band or do any special settings.
Modem Dial String
- Such value is used to dial through USB
mode. Please use the default value. If you have any question,
please contact to your ISP.
PPP Username
- Type the PPP username (optional).
PPP Password
- Type the PPP password (optional).
Index (1-15) -
Set the PCs on LAN to work at certain time
interval only. You may choose up to 4 schedules out of the 15
schedules pre-defined in
Applications >> Schedule
setup. The
default setting of this filed is blank and the function will always
work.
WAN Connection Detection -
Such function allows you to
verify whether network connection is alive or not through ARP
Detect or Ping Detect.
Mode
– Choose
ARP Detect
or
Ping Detect
for the system to
execute for WAN detection.
Ping IP
– If you choose Ping Detect as detection mode, you have
to type IP address in this field for pinging.
TTL (Time to Live)
– Displays value for your reference. TTL
value is set by telnet command.
Default –
Click this button to reset to factory setting.
ISP Access Setup
Enter your allocated username, password and authentication
parameters according to the information provided by your ISP. If
you want to connect to Internet all the time, you can check
Always On
.
Username
– Type in the username provided by ISP in this field.
Password
– Type in the password provided by ISP in this field.
PPP Authentication
– Select
PAP only
or
PAP or CHAP
for
PPP.
Idle Timeout
– Set the timeout for breaking down the Internet
after passing through the time without any action. This setting is
active only when the
Active on demand
option for Active Mode
Page 118 / 335
Vigor2710 Series User’s Guide
106
is selected in
WAN>> General Setup
page.
IP Address From ISP
Usually ISP dynamically assigns IP address to you each time you
connect to it and request. In some case, your ISP provides service
to always assign you the same IP address whenever you request.
In this case, you can fill in this IP address in the Fixed IP field.
Please contact your ISP before you want to use this function.
WAN IP Alias
- If you have multiple public IP addresses and
would like to utilize them on the WAN interface, please use
WAN IP Alias. You can set up to 8 public IP addresses other than
the current one you are using. Notice that this setting is available
for WAN1 only. Type the additional WAN IP address and check
the Enable box. Then click OK to exit the dialog.
Fixed IP
– Click
Yes
to use this function and type in a fixed IP
address in the box of
Fixed IP Address
.
Default MAC Address
– You can use
Default MAC
Address
or specify another MAC address by typing on the boxes
of MAC Address for the router.
Specify a MAC Address –
Type the MAC address for the router
manually.
Index (1-15) in Schedule Setup -
You can type in four sets of
time schedule for your request. All the schedules can be set
previously in
Applications – Schedule
web page and you can use
the number that you have set in that web page.
After finishing all the settings here, please click
OK
to activate them.
Page 119 / 335
Vigor2710 Series User’s Guide
107
MPoA
MPoA is a specification that enables ATM services to be integrated with existing LANs,
which use either Ethernet, token-ring or TCP/IP protocols. The goal of MPoA is to allow
different LANs to send packets to each other via an ATM backbone.
To use
MPoA
as the accessing protocol of the Internet, select
MPoA
mode. The following
web page will appear.
MPoA
(RFC1483/2684)
Click
Enable
for activating this function. If you click
Disable
,
this function will be closed and all the settings that you adjusted
in this page will be invalid.
DSL Modem Settings
Set up the DSL parameters required by your ISP. These are vital
for building DSL connection to your ISP.
Multi-PVC channel
- The selections displayed here are
determined by the page of
Internet Access
–
Multi PVCs
.
Select
M-PVCs Channel
means no selection will be chosen.
Encapsulating Type
- Drop down the list to choose the type
provided by ISP.
VPI
- Type in the value provided by ISP.
Page 120 / 335
Vigor2710 Series User’s Guide
108
VCI
- Type in the value provided by ISP.
Modulation
– Drop down the list to choose a proper modulation
for the router.
VLAN Enable
- Enable the function of VLAN with tag. The
router will add specific VLAN number to all packets while
sending them out. Please type the tag value and specify the
priority for the packets sending by the router.
VID
– Type the value as the VLAN ID number. The range is form
0 to 4095.
Priority
– Type the packet priority number for such VLAN. The
range is from 0 to 7.
WAN Connection
Detection
Such function allows you to verify whether network connection is
alive or not through ARP Detect or Ping Detect.
Mode
– Choose
ARP Detect
or
Ping Detect
for the system to
execute for WAN detection.
Ping IP
– If you choose Ping Detect as detection mode, you have
to type IP address in this field for pinging.
TTL (Time to Live)
– Displays value for your reference. TTL
value is set by telnet command.
RIP Protocol
Routing Information Protocol is abbreviated as RIP
（
RFC1058
）
specifying how routers exchange routing tables information. Click
Enable RIP
for activating this function.
Bridge Mode
If you choose
Bridged IP
as the protocol, you can check this box
to invoke the function. The router will work as a bridge modem.
WAN Backup Setup
3G USB Modem –
If you have installed a 3G USB modem on the
router, please
enable
Dial Backup Mode
to perform file backup
via USB device. After choosing
Enable,
please click the
3G USB
Modem
link to access into the following page for configuring
detailed settings.
PPP Client Mode -
Click
Enable
to activate this mode for
WAN2.
SIM PIN code
- Type PIN code of the SIM card that will be used

Rate

4 / 5 based on 1 vote.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top