1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor-2710
    5. /
  5. 25
Page 121 / 335 Scroll up to view Page 116 - 120
Vigor2710 Series User’s Guide
109
to access Internet.
Modem Initial String
- Such value is used to initialize USB
modem. Please use the default value. If you have any question,
please contact to your ISP.
APN Name
– APN (Access Point Name) is provided by your ISP
for identifying different access points. Simply click
Apply
to
apply such name. Finally, you have to click
OK
to save the
setting.
Apply
– Activate the function of identification.
Modem Initial String2 -
The initial string 1 is shared with APN.
In some cases, users may need another initial
AT
command to
restrict 3G band or do any special settings.
Modem Dial String
- Such value is used to dial through USB
mode. Please use the default value. If you have any question,
please contact to your ISP.
PPP Username
- Type the PPP username (optional).
PPP Password
- Type the PPP password (optional).
Index (1-15) -
Set the PCs on LAN to work at certain time
interval only. You may choose up to 4 schedules out of the 15
schedules pre-defined in
Applications >> Schedule
setup. The
default setting of this filed is blank and the function will always
work.
WAN Connection Detection -
Such function allows you to
verify whether network connection is alive or not through ARP
Detect or Ping Detect.
Mode
– Choose
ARP Detect
or
Ping Detect
for the system to
execute for WAN detection.
Ping IP
– If you choose Ping Detect as detection mode, you have
to type IP address in this field for pinging.
TTL (Time to Live)
– Displays value for your reference. TTL
value is set by telnet command.
Default –
Click this button to reset to factory setting.
WAN IP Network
Settings
This group allows you to obtain an IP address automatically and
allows you type in IP address manually.
Obtain an IP address automatically
– Click this button to
obtain the IP address automatically.
Router Name
– Type in the router name provided by ISP.
Domain Name
– Type in the domain name that you have
assigned.
Specify an IP address
– Click this radio button to specify some
data.
WAN IP Alias
- If you have multiple public IP addresses and
would like to utilize them on the WAN interface, please use
WAN IP Alias. You can set up to 8 public IP addresses other than
the current one you are using. Notice that this setting is available
for WAN1 only. Type the additional WAN IP address and check
Page 122 / 335
Vigor2710 Series User’s Guide
110
the Enable box. Then click
OK
to exit the dialog.
IP Address
– Type in the private IP address.
Subnet Mask
– Type in the subnet mask.
Gateway IP Address
– Type in gateway IP address.
Default MAC Address
Type in MAC address for the router.
You can use
Default MAC Address
or specify another MAC
address for your necessity.
MAC Address
– Type in the MAC address for the router
manually.
DNS Server IP
Address
Type in the primary IP address for the router. If necessary, type in
secondary IP address for necessity in the future.
After finishing all the settings here, please click
OK
to activate them.
Page 123 / 335
Vigor2710 Series User’s Guide
111
4.1.3 Multi-PVCs
This router allows you to create multi-PVCs for different data transferring for using. Simply
go to
Internet Access
and select
Multi-PVC Setup
page.
General
The system allows you to set up to eight channels which are ready for choosing as the first
PVC line that will be used as multi-PVCs.
Enable
Check this box to enable that channel. The channels that you
enabled here will be shown in the
Multi-PVC channel
drop
down list on the web page of
Internet Access
. Though you can
enable eight channels in this page, yet only one channel can be
chosen on the web page of
Internet Access
.
VPI
Type in the value provided by your ISP.
VCI
Type in the value provided by your ISP.
QoS Type
Select a proper QoS type for the channel.
Protocol
Select a proper protocol for this channel.
Page 124 / 335
Vigor2710 Series User’s Guide
112
Encapsulation
Choose a proper type for this channel. The types will be different
according to the protocol setting that you choose.
WAN link for Channel 3, 4, 5
WAN link for Channel 3, 4, 5 are provided for router-borne application such as TR069 and
VoIP. The settings must be applied and obtained from your ISP. For your special request,
please contact with your ISP and then click WAN link of Channel 3, 4 or 5 to configure your
router.
WAN for
Router-borne
Application
Choose the router service for channel 3, 4 or 5.
Management
- It can be specified for general management (Web
configuration/telnet/TR069). If you choose Management, the
Page 125 / 335
Vigor2710 Series User’s Guide
113
configuration for this PVC will be effective for Web
configuration/telnet/TR069.
VoIP
- It can be specified for VoIP only. If you choose VoIP, the
configuration for this PVC will be effective for VoIP data
transmitting and receiving.
Enable/Disable
Click
Enable
for activating this function. If you click
Disable
,
this function will be closed and all the settings that you adjusted
in this page will be invalid.
DSL Modem Settings
Set up the DSL parameters required by your ISP. These are vital
for building DSL connection to your ISP.
VPI
- Type in the value provided by ISP.
VCI
- Type in the value provided by ISP.
QoS Type
-Select a proper QoS type for the channel.
Protocol
- Select a proper protocol for this channel. There are
three options, PPPoE, PPPoA and MPoA for you to select. The
following settings will be changed according to the protocol
selected here.
Encapsulating Type
- Drop down the list to choose the type
provided by ISP.
WAN Connection
Detection
Such function allows you to verify whether network connection
is alive or not through ARP Detect or Ping Detect.
Mode
– Choose
ARP Detect
or
Ping Detect
for the system to
execute for WAN detection.
Ping IP
– If you choose Ping Detect as detection mode, you have
to type IP address in this field for pinging.
TTL (Time to Live)
– Displays value for your reference. TTL
value is set by telnet command.
ISP Access Setup
Enter your allocated username, password and authentication
parameters according to the information provided by your ISP. If
you want to connect to Internet all the time, you can check
Always On
.
Username
– Type in the username provided by ISP in this field.
Password
– Type in the password provided by ISP in this field.
PPP Authentication
– Select
PAP only
or
PAP or CHAP
for
PPP.
Idle Timeout
– Set the timeout for breaking down the Internet
after passing through the time without any action. This setting is
active only when the
Always On
option is note selected.
IP Address from ISP
Fixed IP
- Click
Yes
to use this function and type in a fixed IP
address in the box of
Fixed IP Address
.
Fixed IP Address -
Type a fixed IP address.
Obtain an IP address
automatically
Click this button to obtain the IP address automatically.
Router Name
– Type in the router name provided by ISP.
Domain Name
– Type in the domain name that you have

Rate

4 / 5 based on 1 vote.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top