DrayTek Vigor 2830 Router Manual PDF (Setup & Configuration Guide)

Page 116 / 357 Scroll up to view Page 111 - 115

Vigor2830 Series User’s Guide

104

Details Page for MPoA in WAN1

MPoA is a specification that enables ATM services to be integrated with existing LANs,

which use either Ethernet, token-ring or TCP/IP protocols. The goal of MPoA is to allow

different LANs to send packets to each other via an ATM backbone.

To use

MPoA

as the accessing protocol of the Internet, select

MPoA

from the

WAN>

>

Internet Access >>WAN1

page. The following web page will appear.

Enable/Disable

Click

Enable

for activating this function. If you click

Disable

,

this function will be closed and all the settings that you adjusted

in this page will be invalid.

DSL Modem Settings

Set up the DSL parameters required by your ISP. These are

vital for building DSL connection to your ISP.

Multi-PVC channel

- The selections displayed here are

determined by the page of

Internet Access

>>

Multi PVCs

.

Select M-PVCs Channel

means no selection will be chosen.

Encapsulating

- Drop down the list to choose the type

provided by ISP.

VPI

- Type in the value provided by ISP.

VCI

- Type in the value provided by ISP.

Modulation

–Default setting is Multimode. Choose the one that

fits the requirement of your router.

Page 117 / 357

Vigor2830 Series User’s Guide

105

WAN Connection

Detection

Such function allows you to verify whether network connection

is alive or not through ARP Detect or Ping Detect.

Mode

– Choose

ARP Detect

or

Ping Detect

for the system to

execute for WAN detection.

Ping IP

– If you choose Ping Detect as detection mode, you

have to type IP address in this field for pinging.

TTL (Time to Live)

– Displays value for your reference. TTL

value is set by telnet command.

RIP Protocol

Routing Information Protocol is abbreviated as RIP

（

RFC1058

）

specifying how routers exchange routing tables information.

Click

Enable RIP

for activating this function.

Bridge Mode

If you choose

Bridged IP

as the protocol, you can check this

box to invoke the function. The router will work as a bridge

modem.

WAN IP Network

Settings

This group allows you to obtain an IP address automatically

and allows you type in IP address manually.

WAN IP Alias

- If you have multiple public IP addresses and

would like to utilize them on the WAN interface, please use

WAN IP Alias. You can set up to 8 public IP addresses other

than the current one you are using. Notice that this setting is

available for WAN1 only. Type the additional WAN IP address

and check the Enable box. Then click

OK

to exit the dialog.

Obtain an IP address automatically

– Click this button to

obtain the IP address automatically.

Router Name

– Type in the router name provided by ISP.

Page 118 / 357

Vigor2830 Series User’s Guide

106

Domain Name

– Type in the domain name that you have

assigned.

Specify an IP address

– Click this radio button to specify some

data.

IP Address

– Type in the private IP address.

Subnet Mask

– Type in the subnet mask.

Gateway IP Address

– Type in gateway IP address.

Default MAC Address

– Type in MAC address for the router.

You can use

Default MAC Address

or specify another MAC

address for your necessity.

Specify a MAC Address

– Type in the MAC address for the

router manually.

DNS Server IP Address

Type in the primary IP address for the router. If necessary, type

in secondary IP address for necessity in the future.

Details Page for PPPoE in WAN2

To choose PPPoE as the accessing protocol of the Internet, please select

PPPoE

from the

WAN>

>

Internet Access >>WAN2

page. The following web page will be shown.

Enable/Disable

Click

Enable

for activating this function. If you click

Disable

,

this function will be closed and all the settings that you adjusted

in this page will be invalid.

ISP Access Setup

Enter your allocated username, password and authentication

parameters according to the information provided by your ISP.

Username

– Type in the username provided by ISP in this

field.

Page 119 / 357

Vigor2830 Series User’s Guide

107

Password

– Type in the password provided by ISP in this field.

Index (1-15) in Schedule Setup -

You can type in four sets of

time schedule for your request. All the schedules can be set

previously in

Application >> Schedule

web page and you can

use the number that you have set in that web page.

WAN Connection

Detection

Such function allows you to verify whether network connection

is alive or not through ARP Detect or Ping Detect.

Mode

– Choose

ARP Detect

or

Ping Detect

for the system to

execute for WAN detection.

Ping IP

– If you choose Ping Detect as detection mode, you

have to type IP address in this field for pinging.

TTL (Time to Live)

– Displays value for your reference. TTL

value is set by telnet command.

PPP/MP Setup

PPP Authentication

– Select

PAP only

or

PAP or CHAP

for

PPP. If you want to connect to Internet all the time, you can

check

Always On

.

Idle Timeout

– Set the timeout for breaking down the Internet

after passing through the time without any action.

IP Address Assignment

Method (IPCP)

Usually ISP dynamically assigns IP address to you each time

you connect to it and request. In some case, your ISP provides

service to always assign you the same IP address whenever you

request. In this case, you can fill in this IP address in the Fixed

IP field. Please contact your ISP before you want to use this

function.

WAN IP Alias

- If you have multiple public IP addresses and

would like to utilize them on the WAN interface, please use

WAN IP Alias. You can set up to 8 public IP addresses other

than the current one you are using. Type the additional WAN IP

address and check the Enable box. Then click

OK

to exit the

dialog.

Fixed IP

– Click

Yes

to use this function and type in a fixed IP

address in the box of

Fixed IP Address

.

Default MAC Address

– You can use

Default MAC Address

or specify another MAC address by typing on the boxes of

MAC Address for the router.

Page 120 / 357

Vigor2830 Series User’s Guide

108

Specify a MAC Address –

Type the MAC address for the

router manually.

After finishing all the settings here, please click

OK

to activate them.

Details Page for Static or Dynamic IP in WAN2

For static IP mode, you usually receive a fixed public IP address or a public subnet, namely

multiple public IP addresses from your DSL or Cable ISP service providers. In most cases, a

Cable service provider will offer a fixed public IP, while a DSL service provider will offer a

public subnet. If you have a public subnet, you could assign an IP address or many IP address

to the WAN interface.

To use

Static or Dynamic IP

as the accessing protocol of the internet, please click the

Static

or Dynamic IP

tab. The following web page will be shown.

Enable / Disable

Click

Enable

for activating this function. If you click

Disable

,

this function will be closed and all the settings that you adjusted

in this page will be invalid.

Keep WAN Connection

Normally, this function is designed for Dynamic IP environments

because some ISPs will drop connections if there is no traffic

within certain periods of time. Check

Enable PING to keep alive

box to activate this function.

PING to the IP

- If you enable the PING function, please specify

the IP address for the system to PING it for keeping alive.

PING Interval

- Enter the interval for the system to execute the

PING operation.

WAN Connection

Such function allows you to verify whether network connection is

Rate

Popular DrayTek Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share