1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor 2830
    5. /
  5. 23
Page 111 / 357 Scroll up to view Page 106 - 110
Vigor2830 Series User’s Guide
99
WAN3 with USB
To use 3G network connection through 3G USB Modem, please configure
WAN3
interface.
Enable
Choose
Yes
to invoke the settings for this WAN interface.
Choose
No
to disable the settings for this WAN interface.
Display Name
Type the description for such WAN interface.
Physical Mode
Display the physical mode of such WAN interface.
Physical type
In such WAN interface, no type can be selected.
Line Speed
If your choose
According to Line Speed
as the
Load Balance
Mode
, please type the line speed for downloading and
uploading for such WAN interface. The unit is kbps.
Active Mode
Choose
Always On
to make the WAN1 connection being
activated always;
Backup WAN
If you choose
Backup
as the
Active Mode
, Backup WAN will
be changed into
Backup Type
. You have to specify which role
the WAN interface should play if you want to backup multiple
WANs. However, ignore this setting if you want to backup a
single WAN.
When any WAN disconnect
– Such backup WAN will be
activated when any master WAN interface disconnects.
When all WAN disconnect
– Such backup WAN will be
activated only when all master WAN interfaces disconnect.
Page 112 / 357
Vigor2830 Series User’s Guide
100
4.1.3 Internet Access
For the router supports multi-WAN function, the users can set different WAN settings (for
WAN1/WAN2/WAN3) for Internet Access. Due to different Physical Mode for WAN
interface, the Access Mode for these connections also varies. Refer to the following figures.
Index
Display the WAN interface.
Display Name
It shows the name of the WAN1/WAN2/WAN3 that entered in
general setup.
Physical Mode
It shows the physical connection for WAN1(ADSL)/WAN2
(Ethernet) /WAN3 (3G USB Modem) according to the real
network connection.
Access Mode
Use the drop down list to choose a proper access mode. The
details page of that mode will be popped up. If not, click
Details Page for accessing the page to configure the settings.
Details Page
This button will open different web page according to the
access mode that you choose in WAN interface
Page 113 / 357
Vigor2830 Series User’s Guide
101
Details Page for PPPoE/PPPoA in WAN1
To choose PPPoE /PPPoA as the accessing protocol of the Internet, please select
PPPoE/PPPoA
from the
WAN>
>
Internet Access >>WAN1
page. The following web page
will be shown.
Enable/Disable
Click
Enable
for activating this function. If you click
Disable
,
this function will be closed and all the settings that you adjusted
in this page will be invalid.
DSL Modem Settings
Set up the DSL parameters required by your ISP. These are
vital for building DSL connection to your ISP.
Multi-PVC channel
- The selections displayed here are
determined by the page of
Internet Access
>>
Multi PVCs
.
Select M-PVCs Channel
means no selection will be chosen.
VPI
- Type in the value provided by ISP.
VCI
- Type in the value provided by ISP.
Encapsulating Type
- Drop down the list to choose the type
provided by ISP.
Protocol
- Drop down the list to choose the one (PPPoE or
PPPoA) provided by ISP.
If you have already used
Quick Start Wizard
to set the
protocol, then it is not necessary for you to change any settings
in this group.
Page 114 / 357
Vigor2830 Series User’s Guide
102
Modulation
–Default setting is Multimode. Choose the one that
fits the requirement of your router.
PPPoE Pass-through
The router offers PPPoE dial-up connection. Besides, you also
can establish the PPPoE connection directly from local clients
to your ISP via the Vigor router. When PPPoA protocol is
selected, the PPPoE package transmitted by PC will be
transformed into PPPoA package and sent to WAN server.
Thus, the PC can access Internet through such direction.
For Wired LAN
– If you check this box, PCs on the same
network can use another set of PPPoE session (different with
the Host PC) to access into Internet.
For Wireless LAN
– If you check this box, PCs on the same
wireless network can use another set of PPPoE session
(different with the Host PC) to access into Internet.
Note:
To have PPPoA Pass-through, please choose PPPoA
protocol and check the box(es) here. The router will behave like
a modem which only serves the PPPoE client on the LAN.
That’s, the router will offer PPPoA dial-up connection.
WAN Connection
Detection
Such function allows you to verify whether network connection
is alive or not through ARP Detect or Ping Detect.
Mode
– Choose
ARP Detect
or
Ping Detect
for the system to
execute for WAN detection.
Ping IP
– If you choose Ping Detect as detection mode, you
have to type IP address in this field for pinging.
TTL (Time to Live)
– Displays value for your reference. TTL
value is set by telnet command.
ISP Access Setup
Enter your allocated username, password and authentication
parameters according to the information provided by your ISP.
Username
– Type in the username provided by ISP in this
field.
Password
– Type in the password provided by ISP in this field.
PPP Authentication
– Select
PAP only
or
PAP or CHAP
for
PPP. If you want to connect to Internet all the time, you can
check
Always On
.
Idle Timeout
– Set the timeout for breaking down the Internet
after passing through the time without any action.
IP Address Assignment
Method (IPCP)
Usually ISP dynamically assigns IP address to you each time
you connect to it and request. In some case, your ISP provides
Page 115 / 357
Vigor2830 Series User’s Guide
103
service to always assign you the same IP address whenever you
request. In this case, you can fill in this IP address in the Fixed
IP field. Please contact your ISP before you want to use this
function.
WAN IP Alias
- If you have multiple public IP addresses and
would like to utilize them on the WAN interface, please use
WAN IP Alias. You can set up to 8 public IP addresses other
than the current one you are using.
Fixed IP
– Click
Yes
to use this function and type in a fixed IP
address in the box of
Fixed IP Address
.
Default MAC Address
– You can use
Default MAC Address
or specify another MAC address by typing on the boxes of
MAC Address for the router.
Specify a MAC Address –
Type the MAC address for the
router manually.
Index (1-15) in Schedule Setup -
You can type in four sets of
time schedule for your request. All the schedules can be set
previously in
Applications >> Schedule
web page and you can
use the number that you have set in that web page.
After finishing all the settings here, please click
OK
to activate them.

Rate

4.7 / 5 based on 3 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top