1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor 2830
    5. /
  5. 20
Page 96 / 357 Scroll up to view Page 91 - 95
Vigor2830 Series User’s Guide
84
Connection Status
If there is no USB storage disk connected to Vigor router, “
No
Disk Connected
” will be shown here.
Disk Capacity
It displays the total capacity of the USB storage disk.
Free Capacity
It displays the free space of the USB storage disk. Click
Refresh
at any time to get new status for free capacity.
Index
It displays the number of the client which connecting to FTP
server.
IP Address
It displays the IP address of the user’s host which connecting to
the FTP server.
Username
It displays the username that user uses to login to the FTP
server.
When you insert USB storage disk into the Vigor router, the system will start to find out such
device within several seconds.
3.6.5 Syslog Explorer
Such page provides real-time syslog and displays the information on the screen.
For Web Syslog
This page displays the time and message for User/Firewall/call/WAN/VPN settings. You can
check
Enable Web Syslog,
specify the type of Syslog
and choose the display mode you want.
Later, the event of Syslog with specified type will be shown for your reference.
Enable Web Syslog
Check this box to enable the function of Web Syslog.
Syslog Type
Use the drop down list to specify a type of Syslog to be
displayed.
Display Mode
There are two modes for you to choose.
Stop record when fulls –
when the capacity of syslog is full,
the system will stop recording.
Always record the new event –
only the newest events will be
Page 97 / 357
Vigor2830 Series User’s Guide
85
recorded by the system.
Time
Display the time of the event occurred.
Message
Display the information for each event.
For USB Syslog
This page displays the syslog recorded on the USB storage disk.
Time
Display the time of the event occurred.
Log Type
Display the type of the record.
Message
Display the information for each event.
3.7 System Maintenance
For the system setup, there are several items that you have to know the way of configuration:
Status, User Password, Time setup and Reboot System.
Below shows the menu items for System Maintenance.
3.7.1 System Status
The
System Status
provides basic network settings of Vigor router. It includes LAN and
WAN interface information. Also, you could get the current running firmware version or
firmware related information from this presentation.
Page 98 / 357
Vigor2830 Series User’s Guide
86
Model Name
Display the model name of the router.
Firmware Version
Display the firmware version of the router.
Build Date/Time
Display the date and time of the current firmware build.
LAN-------
LAN1/LAN2/LAN3/LAN4
There are four LAN ports with different IP address offered by
Vigor router. The MAC address, IP address, Subnet Mask,
DHCP Server and DNS settings for each LAN port is displayed.
IP Routed Subnet
Display the general information for the usage of IP routed.
MAC Address
Display the MAC address of the LAN Interface.
IP Address
Display the IP address of the LAN interface.
Subnet Mask
Display the subnet mask address of the LAN interface.
DHCP Server
Display the current status of DHCP server of the LAN
interface.
DNS
Display the assigned IP address of the primary DNS.
Wireless LAN-------
MAC Address
Display the MAC address of the wireless LAN.
Frequency Domain
It can be Europe (13 usable channels), USA (11 usable
channels) etc. The available channels supported by the wireless
products in different countries are various.
Firmware Version
It indicates information about equipped WLAN miniPCi card.
This also helps to provide availability of some features that are
bound with some WLAN miniPCi.
SSID
Display the SSID of the router.
WAN-------
Link Status
Display current connection status.
MAC Address
Display the MAC address of the WAN Interface.
Page 99 / 357
Vigor2830 Series User’s Guide
87
Connection
Display the connection type.
IP Address
Display the IP address of the WAN interface.
Default Gateway
Display the assigned IP address of the default gateway.
3.7.2 User Password
This page allows you to set new password for user operation.
Old Password
Type in the old password. The factory default setting for
password is blank.
New Password
Type in new password in this field.
Confirm Password
Type in the new password again.
When you click
OK
, the login window will appear. Please use the new password to access
into the web configurator again.
3.7.3 Time and Date
It allows you to specify where the time of the router should be inquired from.
Current System Time
Click
Inquire Time
to get the current time.
Use Browser Time
Select this option to use the browser time from the remote
administrator PC host as router’s system time.
Use Internet Time
Select to inquire time information from Time Server on the
Internet using assigned protocol.
Page 100 / 357
Vigor2830 Series User’s Guide
88
Time Protocol
Select a time protocol.
Server IP Address
Type the IP address of the time server.
Time Zone
Select the time zone where the router is located.
Enable Daylight Saving
Check the box to activate daylight saving function. Such feature
is useful for some areas.
Automatically Update
Interval
Select a time interval for updating from the NTP server.
Click
OK
to save these settings.
3.7.4 Reboot System
The Web Configurator may be used to restart your router for using current configuration.
Click
Reboot System
from
System Maintenance
to open the following page.
Click
OK
. The router will take 5 seconds to reboot the system.
Note:
When the system pops up Reboot System web page after you configure web settings,
please click
OK
to reboot your router for ensuring normal operation and preventing
unexpected errors of the router in the future.
3.8 Diagnostics
Diagnostic Tools provide a useful way to
view
or
diagnose
the status of your Vigor router.
Below shows the menu items for Diagnostics.

Rate

4.7 / 5 based on 3 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top