1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor 2830
    5. /
  5. 25
Page 121 / 357 Scroll up to view Page 116 - 120
Vigor2830 Series User’s Guide
109
Detection
alive or not through ARP Detect or Ping Detect.
Mode
– Choose
ARP Detect
or
Ping Detect
for the system to
execute for WAN detection.
Ping IP
– If you choose Ping Detect as detection mode, you have
to type IP address in this field for pinging.
TTL (Time to Live)
– Displays value for your reference. TTL
value is set by telnet command.
RIP Protocol
Routing Information Protocol is abbreviated as RIP
（
RFC1058
）
specifying how routers exchange routing tables information. Click
Enable RIP
for activating this function.
WAN IP Network
Settings
This group allows you to obtain an IP address automatically and
allows you type in IP address manually.
WAN IP Alias
- If you have multiple public IP addresses and
would like to utilize them on the WAN interface, please use
WAN IP Alias. You can set up to 8 public IP addresses other than
the current one you are using.
Obtain an IP address automatically
– Click this button to
obtain the IP address automatically if you want to use
Dynamic
IP
mode.
Router Name
: Type in the router name provided by ISP.
Domain Name
: Type in the domain name that you have assigned.
Specify an IP address
– Click this radio button to specify some
data if you want to use
Static IP
mode.
IP Address
: Type the IP address.
Subnet Mask
: Type the subnet mask.
Gateway IP Address
: Type the gateway IP address.
Default MAC Address
: Click this radio button to use default
MAC address for the router.
Specify a MAC Address
: Some Cable service providers specify
a specific MAC address for access authentication. In such cases
you need to click the
Specify a MAC Address
and enter the
MAC address in the MAC Address field.
Page 122 / 357
Vigor2830 Series User’s Guide
110
DNS Server IP Address
Type in the primary IP address for the router if you want to use
Static IP
mode. If necessary, type in secondary IP address for
necessity in the future.
After finishing all the settings here, please click
OK
to activate them.
Details Page for PPTP/L2TP in WAN2
To use
PPTP/L2TP
as the accessing protocol of the internet, please click the
PPTP/L2TP
tab.
The following web page will be shown.
PPTP/L2TP
Enable PPTP-
Click this radio button to
enable a PPTP client
to establish a tunnel to a DSL modem on the WAN interface.
Enable L2TP
- Click this radio button to
enable a L2TP client
to establish a tunnel to a DSL modem on the WAN interface.
Disable
– Click this radio button to close the connection
through PPTP or L2TP.
Server Address
- Specify the IP address of the PPTP/L2TP
server if you enable PPTP/L2TP client mode.
Specify Gateway IP Address
– Specify the gateway IP
address for DHCP server.
ISP Access Setup
Username
-Type in the username provided by ISP in this
field.
Password
-Type in the password provided by ISP in this field.
Index (1-15) in Schedule Setup -
You can type in four sets of
time schedule for your request. All the schedules can be set
previously in
Application >> Schedule
web page and you can
use the number that you have set in that web page.
PPP Setup
PPP Authentication
- Select
PAP only
or
PAP or CHAP
for
PPP.
Idle Timeout
- Set the timeout for breaking down the Internet
Page 123 / 357
Vigor2830 Series User’s Guide
111
after passing through the time without any action.
IP Address Assignment
Method(IPCP)
WAN IP Alias
- If you have multiple public IP addresses and
would like to utilize them on the WAN interface, please use
WAN IP Alias. You can set up to 8 public IP addresses other
than the current one you are using.
Fixed IP
- Usually ISP dynamically assigns IP address to you
each time you connect to it and request. In some case, your
ISP provides service to always assign you the same IP address
whenever you request. In this case, you can fill in this IP
address in the Fixed IP field. Please contact your ISP before
you want to use this function. Click
Yes
to use this function
and type in a fixed IP address in the box.
Fixed IP Address -
Type a fixed IP address.
WAN IP Network
Settings
Obtain an IP address automatically
– Click this button to
obtain the IP address automatically.
Specify an IP address
– Click this radio button to specify
some data.
IP Address
– Type the IP address.
Subnet Mask
– Type the subnet mask.
After finishing all the settings here, please click
OK
to activate them.
Page 124 / 357
Vigor2830 Series User’s Guide
112
Details Page for PPP in WAN3
To use
PPP
(for 3G USB Modem) as the accessing protocol of the internet, please choose
Internet Access
from
WAN
menu. Then, select
PPP
mode for WAN2. The following web
page will be shown.
Enable / Disable
Click
Enable
for activating this function. If you click
Disable
,
this function will be closed and all the settings that you adjusted
in this page will be invalid.
SIM PIN code
Type PIN code of the SIM card that will be used to access
Internet.
Modem Initial String
Such value is used to initialize USB modem. Please use the
default value. If you have any question, please contact to your
ISP.
APN Name
APN means Access Point Name which is provided and required
by some ISPs. Type the name and click Apply.
Modem Initial String2
The initial string 1 is shared with APN.
In some cases, user may need another initial AT command to
restrict 3G band or do any special settings.
Modem Dial String
Such value is used to dial through USB mode. Please use the
default value. If you have any question, please contact to your
ISP.
PPP Username
Type the PPP username (optional).
PPP Password
Type the PPP password (optional).
Always On
If you want to connect to Internet all the time, you can check
Always On
.
Page 125 / 357
Vigor2830 Series User’s Guide
113
Idle Timeout
– Set the timeout for breaking down the Internet
after passing through the time without any action.
Index (1-15) in Schedule Setup -
You can type in four sets of
time schedule for your request. All the schedules can be set
previously in
Application >> Schedule
web page and you can
use the number that you have set in that web page
WAN Connection
Detection
Such function allows you to verify whether network connection
is alive or not through ARP Detect or Ping Detect.
Mode
– Choose
ARP Detect
or
Ping Detect
for the system to
execute for WAN detection.
Ping IP
– If you choose Ping Detect as detection mode, you
have to type IP address in this field for pinging.
TTL (Time to Live)
– Displays value for your reference. TTL
value is set by telnet command.
4.1.4 Multi-PVCs
This router allows you to create multi-PVCs for different data transferring for using. Simply
go to
Internet Access
and select
Multi-PVCs
page.
General
The system allows you to set up to eight channels which are ready for choosing as the first
PVC line that will be used as multi-PVCs.
Enable
Check this box to enable that channel. The channels that you
enabled here will be shown in the
Multi-PVC channel
drop
down list on the web page of
Internet Access
. Though you can
enable eight channels in this page, yet only one channel can be
chosen on the web page of
Internet Access
.
VPI
Type in the value provided by your ISP.
VCI
Type in the value provided by your ISP.

Rate

4.7 / 5 based on 3 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top