Vigor2830 Series User’s Guide
117
Port-based Bridge
General page lets you set the first PVC. As to set the second PVC line, please click the
Port-based
Bridge
tab to open Bridge configuration page.
Enable
Check this box to enable that channel. Only channel 3 to 8 can
be set in this page, for channel 1 to 2 are reserved for NAT
using.
P1 to P4
It means the LAN port 1 to 4. Check the box to designate the
LAN port for channel 3 to 8.
Direction
Choose the direction of data transmission for applying
Multi-PVC settings.
Service Type
Normally, service type is used for the service of video stream
(e.g., IPTV). It can divide the packets from remote control and
from video stream into different PVC. Such feature is used for
specific application. Please choose
Normal
as the
Service Typ
e.
Normal
– It means that the PVC can accept all packets.
IGMP
–It means that such PVC can accept IGMP packets only.
Such type just meets a specific environment on some ISPs. Data
and IGMP packets will be transmitted and received with
different PVC.
Add Tag
To identify the usage of PVC, check this box to invoke this
setting. And type the number for VLAN ID (number).
Priority
To add the packet priority number for such VLAN. The range is
from 0 to 7.
Click
Clear
to remove all the configurations in this page if you do not satisfy it. When you
finish the configuration, please click
OK
to save and exit this page. Or click
Cancel
to abort
the configuration and exit this page.
19216811.live