Page 36 / 103
Scroll up to view Page 31 - 35
DSL-2750U User Manual
33
The IP address available in the DHCP IP address pool changes automatically if you
change the IP address of the device.
You can also enable the secondary LAN IP address. The two LAN IP addresses
must be in different networks.
Choose
Setup
>
Local Network
. The
Local Network
page shown in the following
figure appears.
By default,
Enable DHCP Server
is selected for the Ethernet LAN interface of the
device. DHCP service supplies IP settings to workstations configured to
automatically obtain IP settings that are connected to the device through the
Ethernet port. When the device is used for DHCP, it becomes the default gateway
for DHCP clients connected to it. If you change the IP address of the device, you
must also change the range of IP addresses in the pool used for DHCP on the LAN.
The IP address pool can contain up to 253 IP addresses.
Page 37 / 103
DSL-2750U User Manual
34
Figure 6
The DHCP IP Address Range will change automatically if the router IP has been
changed.
Click
Apply
to save the settings.
In the
Local Network
page, you can assign IP addresses on the LAN to specific
individual computers based on their MAC addresses by using the DHCP
Reservations List.
Click
Add
to add static DHCP (optional). The page shown in the following figure
appears.
Page 38 / 103
DSL-2750U User Manual
35
Select
Enable
to reserve the IP address for the designated PC with the configured
MAC address.
The
Computer Name
helps you to recognize the PC with the MAC address, for
example, Father’s Laptop.
Click
Apply
to save the settings.
After the DHCP reservation is saved, the DHCP reservations list displays the
configuration.
If the DHCP reservations list table is not empty, you can select one or more items
and click
Edit
or
Delete
.
4.2.6
Time and Date
Choose
Setup
>
Time and Date
. The page shown in the following figure appears.
Page 39 / 103
DSL-2750U User Manual
36
Figure 7 Default to SA time zone
In the
Time and Date
page, you can configure, update, and maintain the correct
time on the internal system clock. You can set the time zone that you are in and the
network time protocol (NTP) server. You can also configure daylight saving to
automatically adjust the time when needed.
Select
Automatically synchronize with Internet time servers
.
Select the specific time server and the time zone from the corresponding
drop-down lists.
Select
Enable manual Daylight Savings, overwrite automatic rule
if necessary.
Set the daylight saving dates as you want.
Click
Apply
to save the settings.
4.2.7
Print Server
Choose
Setup
>
Print Server
. The page shown in the following figure appears.
Page 40 / 103
DSL-2750U User Manual
37
Select
Enable on-board print server
, the page shown in the following figure
appears.
Printer name
: can be any text string up to 80 characters.
Make and model
: can be any text string up to 80 characters.
Click
Save/Apply
to save the settings.
4.2.8
Logout
Choose
Setup
>
Logout
. The page shown in the following figure appears. In this
page, you can log out of the configuration page.
19216811.live