Page 41 / 103
Scroll up to view Page 36 - 40
DSL-2750U User Manual
38
4.3
Advanced
This section includes advanced features used for network management, security
and administrative tools to manage the device. You can view status and other
information that are used to examine performance and troubleshoot.
4.3.1
Wireless Settings
This function is used to modify the standard 802.11 wireless radio settings. It is
recommend not to change the default settings, because incorrect settings may
impair the performance of your wireless radio. The default settings provide the best
wireless radio performance in most environments.
Choose
ADVANCED
>
Wireless Settings
. The page shown in the following figure
appears.
Page 42 / 103
DSL-2750U User Manual
39
4.3.1.1
Wireless Basics
In the
Wireless Settings
page, click
Wireless Basic,
the page shown in the following
figure appears.
In this page, you can configure the parameters of wireless LAN clients
that may connect to the device.
Enable Wireless
: Select this to turn Wi-Fi on and off.
Wireless Network Name (SSID)
: The Wireless Network Name is a unique
name that identifies a network. All devices on a network must share the
same wireless network name in order to communicate on the network. If you
decide to change the wireless network name from the default setting, enter
your new wireless network name in this field.
Visibility Status
: You can select
Visible
or
Invisible
.
Country
: Select the country from the drop-down list.
Wireless Channel
: Select the wireless channel from the drop-down menu. It
is different for different countries.
802.11 Mode
: Select the appropriate 802.11 mode based on the wireless
clients in your network. The drop-down menu options are 802.11n auto,
802.11g only, Mixed 802.11g and 802.11b, or 802.11b only.
Click
Apply
to save the settings.
Page 43 / 103
DSL-2750U User Manual
40
4.3.1.2
MAC Filtering
In the
Wireless Settings
page, click
MAC Filtering
, the page shown in the
following figure appears.
In this page, you can allow or deny users access to the wireless router based on
their MAC address.
Click
Add
, the page shown in the following figure appears.
4.3.1.3
Security Settings
In the
Wireless Settings
page, click
Security Settings.
The page shown in the
following figure appears.
Page 44 / 103
DSL-2750U User Manual
41
Select the SSID that you want to configure from the drop-down list.
Page 45 / 103
DSL-2750U User Manual
42
Select the encryption type from the
Security Mode
drop-down list. You can select
WEP-Open System, WEP-Shared Key, WPA-Personal and WPA-Enterprise.
If you select
WEP-Open System
, the page shown in the following figure appears.
WEP (Wireless Encryption Protocol)
encryption can be enabled for security and
privacy. WEP encrypts the data portion of each frame transmitted from the wireless
adapter using one of the predefined keys.
The router offers 64 or 128 bit encryption with four keys available.
Select
Encryption Strength
from the drop-down menu. (128 bit is stronger than 64
bit)
19216811.live