Page 46 / 103
Scroll up to view Page 41 - 45
DSL-2750U User Manual
43
Enter the key into the Network Key field 1~4. (Key length is outlined at the bottom
of the window.)
Click
Apply/Save
to save the settings.
If you select
WEP-Shared Key
, the page shown in the following figure appears.
If you select
WPA-Personal
, the page shown in the following figure appears.
Page 47 / 103
DSL-2750U User Manual
44
If you select
WPA- Enterprise
, the page shown in the following figure appears.
Page 48 / 103
DSL-2750U User Manual
45
You can only use WPA-enterprise if you have set up RADIUS server. This is the
WPA/WPA2 authentication with RADIUS server instead of pre-shared key.
4.3.2
Port Forwarding
This function is used to open ports on your device and redirect data through those
ports to a single PC on your network (WAN-to-LAN traffic). It allows remote users to
access services on your LAN, such as FTP for file transfers or SMTP and POP3 for
e-mail. The device accepts remote requests for these services at your global IP
address. It uses the specified TCP or UDP protocol and port number, and redirects
these requests to the server on your LAN with the LAN IP address you specify.
Page 49 / 103
DSL-2750U User Manual
46
Note that the specified private IP address must be within the available range of the
subnet where the device is in.
Choose
ADVANCED
>
Port Forwarding
. The page shown in the following figure
appears.
Click
Add
to add a virtual server.
Page 50 / 103
DSL-2750U User Manual
47
Select a service for a preset application, or enter a name in the
Custom Server
field.
Enter an IP address in the
Server IP Address
field, to appoint the corresponding
PC to receive forwarded packets.
The Ports show the ports that you want to open on the device. The
TCP/UDP
means the protocol type used for the opened ports.
19216811.live