DSL-2750U User Manual

13

In this page, enter the user name and password provided by your ISP.

If the Protocol is

Dynamic IP

or

Bridge

, the page shown in the following figure

appears.

DSL-2750U User Manual

14

If the Protocol is

Static IP

, the page shown in the following figure appears.

Enter the

IP Address

,

Subnet Mask

,

Default Gateway

, and

Primary DNS Server

.

Click

Next

. The page shown in the following page appears.

DSL-2750U User Manual

15

Select

Visible

to publish you Wireless network SSID so it can be used by other

wireless clients or select

Invisible

to hide your wireless network so that users need

to manually enter SSID in order to connect to your wireless network.

Security Level – Select the security level required. The most secure level is the

default level already selected.

Wireless Security Key - Enter an appropriate wireless security key for the Security

Level required. It is recommended that it is different to that of the default but should

be easily remembered. Note the required characters for the type of Security Level

selected.

DSL-2750U User Manual

16

Note:

You will need to enter the same key here into your wireless clients in

order to enable proper wireless connection.

Step 7

Configure the wireless network. Enter the information and click

Next

.

Step 8

Completed And Apply. Click

Apply

to apply current settings and finish

the setup of the DSL-2750U router.

Click

Back

to review or modify any

settings.

DSL-2750U User Manual

17

Note:

In each step of the Wizard page, you can click

Back

to review or modify

the previous settings. Click

Cancel

to exit the wizard page.

4.2.2

Internet Setup

Choose

Setup

>

Internet Setup

. The page shown in the following figure appears.

In this page, you can configure the WAN interface of the device.

To add another WAN connection click

Add

in

“INTERNET SETUP”

, or tick the box

next to 8/35 and click

Edit.

The page shown in the following figure appears.