Page 86 / 103
Scroll up to view Page 81 - 85
DSL-2750E User Manual
83
3.4 Management
In the main interface, click
Management
tab to enter the Management menu as
shown in the following figure. The submenus are
Global IPv6
,
System
Management
,
Firmware
Update
,
Access
Controls
,
Diagnosis
,
Log
Configuration
and
Logout
.
3.4.1 Global IPv6
Choose
MANAGEMENT
>
Global IPv6
. The page shown in the following figure
appears. In this page you can enable or disable IPv6 function.
3.4.2 System Management
Choose
MANAGEMENT
>
System Management
. The page shown in the
following figure appears.
Page 87 / 103
DSL-2750E User Manual
84
In this page, you can reboot device, back up the current settings to a file, update
settings from the file saved previously and restore the factory defaults.
The buttons in this page are described as follows.
Field
Description
Reboot
Click this button to reboot the device.
Backup Setting
Click this button to save the settings to the local hard
drive. Select a location on your computer to back up
the file. You can name the configuration file.
Update setting
Click
Browse
to select the configuration file of device
and then click
Update Settings
to begin updating the
device configuration.
Restore
Default
Setting
Click this button to reset the device to default settings.
Page 88 / 103
DSL-2750E User Manual
85
Note
:
Do not turn off your device or press the Reset button while an
operation in this page is in progress.
3.4.3 Firmware Update
Choose
MANAGEMENT
>
Firmware Update
. The page shown in the following
figure appears. In this page, you can upgrade the firmware of the device.
To update the firmware, take the following steps.
Step 1
Click
Browse…
to find the file.
Step 2
Select
Click Config
.
Step 3
Click
Update Firmware
to copy the file.
The device loads the file and reboots automatically.
Note
:
Do not turn off your device or press the Reset button while an
operation in this page is in progress.
Page 89 / 103
DSL-2750E User Manual
86
3.4.4 Access Controls
Choose
MANAGEMENT
>
Access Controls
. The
Access Controls
page
shown in the following figure appears. The page contains
User Management
,
Services
and
IP Address
.
3.4.4.1
User Management
In the
Access Controls
page, click
User Management
. The page shown in the
following figure appears. In this page, you can change the password of the user
and set time for automatic logout.
Page 90 / 103
DSL-2750E User Manual
87
You should change the default password to secure your network. Ensure that you
remember the new password or write it down and keep it in a safe and separate
location for future reference. If you forget the password, you need to reset the
device to the factory default settings and all configuration settings of the device
are lost.
Enter the current and new passwords and confirm the new password to change
the password. Click
Apply
to apply the settings.
3.4.4.2
Services
In the
Access Controls
page, click
Services
. The page shown in the following
figure appears.
19216811.live