Page 96 / 103
Scroll up to view Page 91 - 95
DSL-2750E User Manual
93
This page displays event log data in the chronological manner. You can read the
event log from the local host or send it to a system log server. Available event
severity levels are as follows: Emergency, Alert, Critical, Error, Warning, Notice,
Informational and Debugging. In this page, you can enable or disable the system
log function.
To log the events, take the following steps.
Step 1
Select
Enable Log
check box.
Step 2
Select the display mode from the
Mode
drop-down list.
Step 3
Enter the
Server IP Address
and
Server UDP Port
if the
Mode
is set
to
Both
or
Remote
.
Step 4
Click
Apply
to apply the settings.
Step 5
Click
View System Log
to view the detail information of system log.
3.4.7
Logout
Choose
MANAGEMENT
>
Logout
. The page shown in the following figure
appears. In this page, you can log out of the configuration page.
Page 97 / 103
DSL-2750E User Manual
94
3.5 Status
In the main interface, click
Status
tab to enter the
Status
menu. The submenus
are
Device Info
,
Wireless Clients
,
DHCP clients
,
Logs
,
Firewall logs
,
Statistics
,
Route Info
and
Logout
. You can view the system information and
monitor performance.
3.5.1 Device Info
Choose
STATUS
>
Device Info
. The page shown in the following figure appears.
Page 98 / 103
DSL-2750E User Manual
95
The page displays the summary of the device status. It includes the information
of firmware version, upstream rate, downstream rate, uptime and Internet
configuration (both wireless and Ethernet statuses).
3.5.2 Wireless Clients
Choose
STATUS
>
Wireless Clients
. The page shown in the following page
appears. The page displays authenticated wireless stations and their statuses.
3.5.3 DHCP Clients
Choose
STATUS
>
DHCP Clients
. The page shown in the following page
appears. This page displays all client devices that obtain IP addresses from the
device. You can view the host name, IP address, MAC address and time
expired(s).
3.5.4 IPv6 Status
Choose
STATUS
>
IPv6 Status
. The page shown in the following page appears.
This page displays the IPv6 Connection information.
Page 99 / 103
DSL-2750E User Manual
96
3.5.5 Logs
Choose
STATUS
>
Logs
. The page shown in the following figure appears. This
page lists the system log. Click
Refresh
to refresh the system log shown in the
table.
Page 100 / 103
DSL-2750E User Manual
97
3.5.6 Firewall Logs
Choose
STATUS
>
Firewall Logs
. The page shown in the following figure
appears. You can view firewall logs in this page. Click
Refresh
to refresh the
system log shown in the table.
3.5.7 Statistics
Choose
STATUS
>
Statistics
. The page shown in the following figure appears.
This page displays the statistics of the network and data transfer. This
information helps technicians to identify if the device is functioning properly. The
information does not affect the function of the device.
19216811.live