Page 76 / 103
Scroll up to view Page 71 - 75
DSL-2750E User Manual
73
3.3.13.4
Default Gateway
Choose
ADVANCED
>
Routing
and click
Default Gateway
. The page shown in
the following figure appears. You may assign a default gateway for the router to
use first.
Click
Apply
to save the settings.
3.3.13.5
RIP
Choose
ADVANCED
>
Routing
and click
RIP
Settings
. The page shown in the
following figure appears. This page is used to select the interfaces on your device
that use RIP and the version of the protocol used.
Page 77 / 103
DSL-2750E User Manual
74
If you are using this device as a RIP-enabled device to communicate with others
using the routing information protocol, enable RIP and click
Apply
to save the
settings.
3.3.13.6
RIPng
Choose
ADVANCED
>
Routing
and click
RIPng
Settings
. The page shown in
the following figure appears. In this page, you may choose an interface and
active RIPng for it.
Click
Apply
to save the settings.
3.3.14 Schedules
Choose
ADVANCED
>
Schedules
. The page shown in the following figure
appears.
Page 78 / 103
DSL-2750E User Manual
75
Click
Add
to add schedule rule. The page shown in the following figure appears.
Click
Apply
to save the settings.
3.3.15 NAT
Choose
ADVANCED
>
NAT
. The page shown in the following figure appears.
Traditional NAT would allow hosts within a private network to transparently
access hosts in the external network, in most cases. In a traditional NAT,
Page 79 / 103
DSL-2750E User Manual
76
sessions are uni-directional, outbound from the private network. Sessions in the
opposite direction may be allowed on an exceptional basis using static address
maps for pre-selected hosts.
In this page, you are allowed to add, edit or remove a virtual server entry.
Click
Add
to add an NAT server. The page shown in the following figure appears.
After setting, click
Apply
to make the settings take effect.
Page 80 / 103
DSL-2750E User Manual
77
3.3.16 FTPD Setting
Choose
ADVANCED
>
FTPD Setting
. The page shown in the following figure
appears. In this page, you can enable or disable the FTP server and set the FTP
port.
3.3.17 FTPD Account
Choose
ADVANCED
>
FTPD Account
. The page shown in the following figure
appears. In this page, you can manage the FTP user information, such as the
user name, password, and the corresponding authority.